Green Dragon
09-18-2006, 12:56 PM
Been sorting through boxes of goodies, lol, and have turned up a few odds and ends that might be of use.
Posting a list here ( and possibly updates as I decide what I 'need' , lol ) , hopeing someone might want to give these a good home * sob sob * , lol ....
I don't have a 'for sale' ( read: price gouger :) ) price on anything, would prefer to trade for items I can use, so I don't have to set a cash-price, but willing to entertain any offers,inquiries,etc.
preliminary list ( some junk, some nice,some others will love more than I, lol ).. in random order.. :
- vintage white convolute BT30B ( original Mark tube)
- vintage white convolute BT30J - this has a hole punched ,ala Sprite, but the hole is closer to one end of tube than should be, usable, but I don;t think original factory hole punched
- FSI CR10-12 centering rings ( sealed bag )
- FSI motor mount C15F (11-1.6), sealed bag
- TA5565
- Centuri ST7 conical nosecone ( not sure what this was used on ?)
- Estes Pulsar = I have two sets of original diecut fins ( not on the sheets),and two sets of original decals for these, easily cloned
- Estes Marauder - again, I have the original diecut fins sheet (still on sheet) and decal
sheet, however, the 'roll pattern' decal for the transition is cut out/ missing -
would be a good one for ,say, a lsot booster, if someone still has the payload section
- Canaroc 1.65" nosecone (unused Black Brant V cone)
- Centuri original decal sheet for Excaliber
- various Estes decals as follows:
Wildfire
Longshot (2 sets)
Alpha (red,white,blue - have two self adhesive sets, one early waterslide set ).
Maniac
Viking (green self-stick,2 sets)
Viking (little man waterslide,blue ink)
- partial sets of decals for the following ( good for repairs,custom,etc, drop me a line if you need a specific part and I'll check ):
Orbital Transport, Pathfinder, Soaring Eagle
- Maxi-Brute Honest John decals ( vintage originals,if they differ,these well stored, but old, should topcoat with clear before use)
- Estes Foxfire decals - these have been partially cut apart, I believe there is a full set, will have to double check against online scans, might help if someone needs partial,etc
- Quest 1.37" nosecone
- Heli-Cat starter set (unbuilt,engines gone,will seperate kit / launcher )
- Astrocam 110 ( arealy buildup version, in box, Astrocam new in bags,Delta 2 rocket has motor mount and lugs glued)
- PML 3" piston ejection setup ( piston,straps,d-rings)
- PML 2.15" Intelli-cone (with e-bay inside)
- Electron Beam launch control (yellow,new unused)
- 1/4" launch rod (2 piece screw-together do from Aerotech Mantis set, never used)
- Estes Hercules 2 stage , unopened bag, mint.
- Estes pnc-50 for SR71 rocket
- Estes pnc-50 cone ( Nemesis / Star Rider cone with canopy and canards)
- Centuri ST7 plastic cone (red,black shoulder,glued but unpainted)
- 1.14 (29mm) x 11" G12 fiberglass motor mount tube
- small satellites from AstroSat kit (unused with streamers in baggie)
- plastic fins,etc from above
- Quest/ MPC plastic coupler bulkheads for T20 tube (2 of these)
- one set of four Maxi Honest John spin nozzles for nosecone, cut from sheet, but never glued to nosecone (nice shape).
still digging, and will post anything else 'exciting' , lol .
please DO see my 'wish list' also posted, and keep em flying :-)
~ AL
Posting a list here ( and possibly updates as I decide what I 'need' , lol ) , hopeing someone might want to give these a good home * sob sob * , lol ....
I don't have a 'for sale' ( read: price gouger :) ) price on anything, would prefer to trade for items I can use, so I don't have to set a cash-price, but willing to entertain any offers,inquiries,etc.
preliminary list ( some junk, some nice,some others will love more than I, lol ).. in random order.. :
- vintage white convolute BT30B ( original Mark tube)
- vintage white convolute BT30J - this has a hole punched ,ala Sprite, but the hole is closer to one end of tube than should be, usable, but I don;t think original factory hole punched
- FSI CR10-12 centering rings ( sealed bag )
- FSI motor mount C15F (11-1.6), sealed bag
- TA5565
- Centuri ST7 conical nosecone ( not sure what this was used on ?)
- Estes Pulsar = I have two sets of original diecut fins ( not on the sheets),and two sets of original decals for these, easily cloned
- Estes Marauder - again, I have the original diecut fins sheet (still on sheet) and decal
sheet, however, the 'roll pattern' decal for the transition is cut out/ missing -
would be a good one for ,say, a lsot booster, if someone still has the payload section
- Canaroc 1.65" nosecone (unused Black Brant V cone)
- Centuri original decal sheet for Excaliber
- various Estes decals as follows:
Wildfire
Longshot (2 sets)
Alpha (red,white,blue - have two self adhesive sets, one early waterslide set ).
Maniac
Viking (green self-stick,2 sets)
Viking (little man waterslide,blue ink)
- partial sets of decals for the following ( good for repairs,custom,etc, drop me a line if you need a specific part and I'll check ):
Orbital Transport, Pathfinder, Soaring Eagle
- Maxi-Brute Honest John decals ( vintage originals,if they differ,these well stored, but old, should topcoat with clear before use)
- Estes Foxfire decals - these have been partially cut apart, I believe there is a full set, will have to double check against online scans, might help if someone needs partial,etc
- Quest 1.37" nosecone
- Heli-Cat starter set (unbuilt,engines gone,will seperate kit / launcher )
- Astrocam 110 ( arealy buildup version, in box, Astrocam new in bags,Delta 2 rocket has motor mount and lugs glued)
- PML 3" piston ejection setup ( piston,straps,d-rings)
- PML 2.15" Intelli-cone (with e-bay inside)
- Electron Beam launch control (yellow,new unused)
- 1/4" launch rod (2 piece screw-together do from Aerotech Mantis set, never used)
- Estes Hercules 2 stage , unopened bag, mint.
- Estes pnc-50 for SR71 rocket
- Estes pnc-50 cone ( Nemesis / Star Rider cone with canopy and canards)
- Centuri ST7 plastic cone (red,black shoulder,glued but unpainted)
- 1.14 (29mm) x 11" G12 fiberglass motor mount tube
- small satellites from AstroSat kit (unused with streamers in baggie)
- plastic fins,etc from above
- Quest/ MPC plastic coupler bulkheads for T20 tube (2 of these)
- one set of four Maxi Honest John spin nozzles for nosecone, cut from sheet, but never glued to nosecone (nice shape).
still digging, and will post anything else 'exciting' , lol .
please DO see my 'wish list' also posted, and keep em flying :-)
~ AL