PDA

View Full Version : Centuri Javelin plans


Gus
12-20-2015, 04:22 PM
If anyone has plans for the Centuri Javelin, please post them. JimZ's Javelin pages are non-functioning and Ye Olde Rocket Plans does not have the Javelin.

Thanks,

Steve

rocketguy101
12-20-2015, 05:23 PM
I believe these came from JimZ sometime ago...

astronwolf
12-20-2015, 10:28 PM
Too bad that those aren't plans. It does have a fin pattern, a late decal pattern, and an instruction sheet, but how long is the airframe and nose cone? I cloned a Javelin just by estimating the airframe length and choosing a 3-inch long nose cone. Looked good enough.

rocketguy101
12-20-2015, 10:48 PM
Centuri's tech report TIR-33 lists some dimensions for the Javelin....I used those to create a rocksim file. NC length 3.6", BT length 9.04, which is close to the ST-79 (9.00")

Gus
12-21-2015, 12:34 AM
David,

Semroc lists the overall height of the Javelin at 12.7". So a 3.6" cone would put the body tube length right where you have it.

Thanks!

Steve