Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   SVDT - Semroc Virtual Design Team (http://www.oldrocketforum.com/forumdisplay.php?f=20)
-   -   SAROS parts (http://www.oldrocketforum.com/showthread.php?t=7313)

CPMcGraw 07-04-2010 12:17 PM

SAROS parts
 
Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?

Fins? :)

Royatl 07-04-2010 04:40 PM

Quote:
Originally Posted by CPMcGraw
Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?

Fins? :)



He's definitely got the nose and reducer. the fin can can be reduced to just a couple of shrouds and the fins are an inch in span (maybe a inch and an eighth), the root is probably an inch and a quarter, and the tip is 3/4" with the trailing edge square.

Tau Zero 07-04-2010 06:32 PM

It's who you know "on the inside"...
 
2 Attachment(s)
Quote:
Originally Posted by CPMcGraw
Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?
BNC-20ED

http://www.semroc.com/Store/Scripts...?idproduct=1048


TA-2050

http://www.semroc.com/Store/Scripts...p?idproduct=829


Fins should probably be 1/16" balsa.


Cheers,

CPMcGraw 07-04-2010 08:03 PM

Thanks, guys! I thought Carl had already put these into his alien contraption, but I couldn't remember the part numbers.

So I guess I no longer have an excuse for not building one... :o

Mark II 07-05-2010 01:17 AM

The Saros also had formed wraps, didn't it?


All times are GMT -5. The time now is 02:47 PM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.