Centuri Point KC-13
3 Attachment(s)
I created this simulation file for the out of production Centuri Point, unlike the file posted for the Semroc kit, this simulation includes the recovery phase of the models flight.
|
1 Attachment(s)
My completed Centuri Point clone; picture attached.
|
Nice looking Point, and thanks for the .rkt file. I see you included a C6-3 sim, I've always used a B4-2 - does it fly well on a C6-3?
|
Quote:
The original instructions for the Centuri Point (enter this address: http://www.spacemodeling.org/jimz/c...Point/kc-13.pdf into the Wayback Machine at https://archive.org/web/) indicates a B4-2 motor only. However the Semroc Clone (KV-58) instructions: http://www.semroc.com/Documents/pdf/Point.pdf indicate that "It is recommended that you use a B4-2 for your first flight. It is a gentler flight than the other choices. A B6-2 can also be used as a second choice. A C6-3 can be used, but it has a long delay for the Point so it will eject on the way down. If you use a C6-3, make sure your recovery area is soft. Don’t fly a C6-3 on your first flight in case it is not stable." I may have to fly mine on a C6-3 and see how is does. |
All times are GMT -5. The time now is 10:16 PM. |
Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.