Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   RockSim Asylum (http://www.oldrocketforum.com/forumdisplay.php?f=24)
-   -   Rocksim Opacity issue (http://www.oldrocketforum.com/showthread.php?t=17536)

Eagle3 10-07-2018 01:41 PM

Rocksim Opacity issue
 
Anyone else have a problem (and solution to) opacity not working on a part? Trying to model a section of PST with an internal structure and setting the opacity to 0 has no effect.

teflonrocketry1 10-12-2018 05:31 PM

2 Attachment(s)
Eagle3,

I can't seem to duplicate the problem you are seeing. Are you sure you have the opacity mode selected in the View Screen? Make sure there is a green checkmark in the brown globe with a green border on right side; its the 5th button from the left in the menu bar at the top of the view screen (bottom panel). I have attached a RockSim file and screen shot of the simulation where I set all the outer body tubes to an opacity of 0.

Eagle3 10-14-2018 08:37 PM

I had tried making a transparent payload section on an old rocksim file and gave up and made a new one that worked. I wasn't aware of the opacity mode button in the 3D view and that's what the problem was.

Thanks!


All times are GMT -5. The time now is 02:34 PM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.