Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Building Techniques (http://www.oldrocketforum.com/forumdisplay.php?f=6)
-   -   Styrofoam (http://www.oldrocketforum.com/showthread.php?t=28)

UMRS 03-12-2005 12:31 PM

Styrofoam
 
Ive been using a hot glue gun for joining styrofoam, I find it messy and it leaves these strings (very fine like spiders web) sometimes. Anybody have a substitute to use instead. I would prefer a "cold" glue.

Maniac BAR 03-14-2005 12:12 AM

I put a rocket together a while ago with TP rolls and styrofoam balls at each end. Then attached them to a regular tube. (Don't ask. building withdrawel night!) Anyway, I used the Titebond II that I use just about on everything for building rockets and it worked just fine. No mess, no reaction to the foam, and everything survived a flat spin after launch and flat hard landing with no damage! The glue seems to hold almost anything together that you might use for a rocket and has done just fine up to and including my This End Up scratch built with "E" power.

UMRS 03-14-2005 03:21 AM

Thank you I will try that .

UMRS 03-19-2005 08:52 AM

Quote:
Originally Posted by Geoffrey Kerbel
I put a rocket together a while ago with TP rolls and styrofoam balls at each end. Then attached them to a regular tube. (Don't ask. building withdrawel night!) Anyway, I used the Titebond II that I use just about on everything for building rockets and it worked just fine. No mess, no reaction to the foam, and everything survived a flat spin after launch and flat hard landing with no damage! The glue seems to hold almost anything together that you might use for a rocket and has done just fine up to and including my This End Up scratch built with "E" power.



Hey the titebond worked perfect thanks alot, and the best part of all NO hot glue burns on the hands :)

jflis 03-30-2005 09:12 PM

What is the cost of TightBond compaired to hotglue sticks? I ask because I recommend the use of hot glue to assemble our Decaffeinator kit (foam coffee cups) and tightbond may be another good choice...

jim

UMRS 03-30-2005 09:31 PM

Jim

I bought a big bottle of it 10oz I think for 5.95 at ACE hardware.

Ltvscout 03-30-2005 10:49 PM

Quote:
Originally Posted by jflis
What is the cost of TightBond compaired to hotglue sticks? I ask because I recommend the use of hot glue to assemble our Decaffeinator kit (foam coffee cups) and tightbond may be another good choice...

jim

Hmmm. Maybe I'll try the Titebond to finish the Decaffeinator I got "almost" finished during our building session at NARCON. Thanks for putting that on for us, Jim!

I had never used hot glue myself till that session. It took a bit to get used to, but after awhile I was cruising with it. It is a tad messy though.

Maniac BAR 04-02-2005 11:54 AM

:D I bought a bottle of Titebond II almost three years ago and have built two dressers, one cabinet and almost 50 rockets so far. There is still about two oz. left. All this for less than $10. :)
I don't know what the cost of the hot glue is but if you don't have the gun already, I believe the Titebond would be the better choice. Except for the plastic to plastic bond, I have not found much this stuff will not hold together!

RocketBoy 32 04-24-2005 01:55 PM

Quote:
Originally Posted by UMRS
Ive been using a hot glue gun for joining styrofoam, I find it messy and it leaves these strings (very fine like spiders web) sometimes. Anybody have a substitute to use instead. I would prefer a "cold" glue.


There's always foam safe C/A glue. I get mine at the local R/C hobby shop under the name "Super Gold". I've used it on several all foam park flyers with no problems. It's excellent for field repairs too as it sets up almost instantly. If you use an accelerator with it it does set up instantly.

dosco 06-30-2005 05:31 PM

Try the polyurethane-based "Gorilla Glue."

I learned about the Polyurethane stuff back in '96 when I learned about water-rockets (I lived in Nor Calif at the time). They used it to glue 2L plastic bottles (virtually impossible to glue with anything else).


All times are GMT -5. The time now is 10:08 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.