Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   WOOSH News (http://www.oldrocketforum.com/forumdisplay.php?f=40)
-   -   Hi-Flyer XXL (http://www.oldrocketforum.com/showthread.php?t=14964)

Rex R 04-05-2015 06:34 PM

Hi-Flyer XXL (with pics)
 
was thinking to build a 3x upscale version of the hi-flyer but ran into a snag. turns out the airframe tubes I have on hand are bt-70lite (thin wall), trying to decide whether to use it or order a standard tube.
Rex

ghrocketman 04-05-2015 08:36 PM

Not sure why anyone would want thinner wall BT-70, but definitely could understand THICK walled tubing.
Get the real stuff at a minimum.

Rex R 04-05-2015 09:09 PM

Probably stems from TVM's design philosophy to make flyweight rockets that can fly on D12s, although I don't know how much weight you save after having to add tape to the nose so it won't wobble and fall off :). thanks for the input.
Rex

Rex R 04-09-2015 11:53 AM

1 Attachment(s)
decided to try slotting a tube to see if I could (w/o crushing it). once I had managed that figured that I might as well use what I had. got the motor mount installed and the forward section done, now to cut and paper the fins.
Rex

Rex R 04-16-2015 04:28 AM

1 Attachment(s)
got some more work done on my Hi-Flyer.
Rex

ghrocketman 04-16-2015 09:56 AM

That should fly nicely on the 29mm Estes F15's.
I would not fly that thin-wall tubing thing on a motor with any more kick than a Aerotech RMS24 F24 though.
Certainly NOT on a REAL F or G like the F52 or G80.
The tubing will probably crumple.

Rex R 04-16-2015 11:38 AM

I had 24mm Ds and Es in mind, more of a 'demo' rocket should get about 500' on a D12-5 and 1200' on an E18(about 400' for the standard size one on an A8). should be just about right for the Woosh lpr fields :).
Rex

Rex R 09-13-2015 02:52 PM

so it had its' first flight today on a D12-5, seemed like it 'used' every inch of the 5' launch rod, but it was a nice straight flight even in bright sunlight the drive flame was clearly visible. downside is now I have to finish painting it :). the A20Demon clone flew very nicely on a C11-5, and the High-flier (normal size) did well with an A8-3.
Rex


All times are GMT -5. The time now is 08:00 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.