Scott,

Attached below is the data for the Thrustline Aerospace Hank from the RockSim file:

TLA Hank Parts

Nose cone Estes - Estes - PNC-60MS, Material: Polystyrene PS Nose shape: Hollow Elliptical, Len: 2.5000 In., Dia: 1.6370 In. Wall thickness: 0.1250 In. Body insert: OD: 1.5120 In., Len: 0.7500 In.

Mass object - Custom, Material: Mass: 0.5600 Oz.

Body tube Estes - EST 3089 - BT-60, Material: Paper OD: 1.6370 In., ID: 1.5950 In., Len: 10.7500 In.

Custom Fin set - 3 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
69.8129684322958, 0.
57.1081327612553, 44.5601469133141
25.2676186721044, 50.9909896603839
0., 0.

Custom Fin set - 3 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
70.1266680784944, 0.
51.1478394834832, 18.8367759250345
25.5813183183029, 22.2874720332183
0.,0.

Body tube 1 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In., ID: 0.7100 In., Len: 2.7500 In. Location: 8.0000 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 1

Ring - Custom, Material: Basswood Centering ringOD: 0.7100 In., Len: 0.1250 In. Location: 0.1250 In. From the front of Body tube 1

Engine hook Estes - Engine hook - Standard size, Material: Mass: 0.0494 Oz.

Body tube 2 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In., ID: 0.7100 In., Len: 2.7500 In. Location: 8.0000 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 2

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 12.5070 In., Spill hole: 0.0000 In. CG: 1.0423 In. , Mass: 0.0769 Oz.

Attached Files

	TLA_Hank2.pdf (1.6 KB, 38 views)
	TLA_Hank3.pdf (1.6 KB, 39 views)

__________________
Bruce S. Levison, NAR #69055