Attached below is the data for the Thrustline Aerospace Scorpion from the RockSim file:
Scorpion parts:
Nose cone - Custom, Material: balsa Nose shape: Hollow Ogive, Len: 3.8000 In., Dia: 0.9760 In. Wall thickness: 0.1250 In. Body insert: OD: 0.8510 In., Len: 0.5000 In. CG: 2.4250 In. , Mass: 0.1600 Oz.
Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 3.5000 In. CG: 1.7500 In. , Mass: 0.0892 Oz.
Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 0.1250 In. CG: 0.0625 In. , Mass: 0.0032 Oz.
Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 0.8750 In. CG: 0.4375 In. , Mass: 0.0223 Oz.
Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 5.0000 In. CG: 2.5000 In. , Mass: 0.1274 Oz.
Transition BMS - TA5060 - Transition 50-60, Material: Balsa Hollow transition: Fwd. Dia: 0.9760 In., Len: 2.0000 In., Rear Dia: 1.6370 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In., CG: 1.1664 In. , Mass: 0.2032 Oz.
Body tube Estes - EST 3089 - BT-60, Material: Paper OD: 1.6370 In. , ID: 1.5950 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 1.1749 Oz.
Custom Fin set - Custom, Material: Balsa (0.125" thick) CG: 1.8727 In. , Mass: 0.3448 Oz., Radial angle 0 degrees
Point List in mm :
88.4333367741963, 0.
60.8071855602792, 115.338913336295
45.0904363135692, 115.338913336295
0., 0
Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 25.3604 In., Spill hole: 0.0000 In. CG: 2.1134 In. , Mass: 3.1608 Oz.
Screw Eye Semroc - SE-10 - Screw Eye, Material: CG: 0.0000 In. , Mass: 0.0080 Oz.
Mass object - Custom, Material: 1/8 In. flat elastic CG: 0.0000 In. , Mass: 0.0551 Oz.
Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 4.7500 In. Location: 13.1250 In. From the front of Body tube CG: 2.3750 In. , Mass: 0.1210 Oz.
Ring BMS - CR2050P - Centering Ring, Material: Paper Centering ring OD: 0.9460 In., ID: 0.7360 In., Len: 0.2500 In. Location: 3.7500 In. From the base of Body tube CG: 0.1250 In. , Mass: 0.1139 Oz.
Ring BMS - CR6050F - Centering Ring 60/50, Material: Kraft phenolic Centering ring OD: 1.5930 In., ID: 0.9780 In., Len: 0.0500 In. Location: 13.2500 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0552 Oz.
Ring BMS - CR6050F - Centering Ring 60/50, Material: Kraft phenolic Centering ring OD: 1.5930 In., ID: 0.9780 In., Len: 0.0500 In. Location: 17.0000 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0552 Oz.
Ring BMS - CR5055F - Centering Ring 5055, Material: Paper Centering ring OD: 1.2830 In., ID: 0.9780 In., Len: 0.0500 In. Location: 17.8750 In. From the front of Body tube CG: 0.0250 In. , Mass: 0.0419 Oz.
Launch lug Estes - ESTES 2328 - LL-3/16, Material: paper OD: 0.1875 In., ID: 0.1687 In., Len: 0.5000 In., Loc: 6.1250 In. CG: 0.2500 In. , Mass: 0.0017 Oz.
Launch lug Estes - ESTES 2328 - LL-3/16, Material: paper OD: 0.1875 In., ID: 0.1687 In., Len: 0.5000 In., Loc: 12.0000 In. CG: 0.2500 In. , Mass: 0.0017 Oz.
Custom Fin set - Custom, Material: Balsa (0.125" thick) CG: 1.2285 In. , Mass: 0.1292 Oz., Radial angle 0 degrees
Point List in mm :
56.4807383149054, 0.
40.9425322149485, 67.7606279599457
31.0026287434942, 67.7606279599457
0., 0
Tube coupler BalsaMachining.com - C60-4 - 1.592x1.524x4 inch long T60 coupler, Material: Paper Tube couplerOD: 1.5950 In., Hole #1: : 38.7100 In. Len: 3.0000 In. Location: 8.1250 In. From the front of Body tube CG: 1.5000 In. , Mass: 0.3381 Oz.
Transition - Custom, Material: Paper Solid transition: Fwd. Dia: 1.6370 In., Len: 1.0000 In., Rear Dia: 1.3250 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In., CG: 0.4828 In. , Mass: 0.0303 Oz.
__________________
Bruce S. Levison, NAR #69055
|