03-03-2019, 01:25 PM
|
|
Surfrajettes Fan
|
|
Join Date: Feb 2008
Location: El Paso
Posts: 1,113
|
|
Comrades:
Attached is a drawing I created using the artwork in an earlier post. It would be a 1/10 scale Ute. The transition seems to be similiar in shape to a Semroc Nike-Tomahawk but it would need the larger end resized to fit a Series 15/BT-58 body tube. If the transition was drilled out for a BT-50 tube, then staging would be possible. As scale staging projects go, this would seem like a good choice.
As noted on the drawing, the Semroc I.Q.S.Y. Tomahawk could be used as a starting point for the second stage.
The boattail could be paper or balsa. Paper would seem to be preferable if you build as a two-stage.
I'd build it. (if someone would turn the transition . . . .)
__________________
NAR 79743
NARTrek Silver
I miss being SAM 062
Awaiting First Launch: Too numerous to count
Finishing: Zooch Saturn V; Alway/Nau BioArcas; Estes Expedition; TLP Standard
Repair/Rescue: Cherokee-D (2); Centuri Nike-Smoke; MX-774
On the Bench: 2650;
Dream Stage: 1/39.37 R-7
|