07-29-2017, 07:46 PM
|
|
Old Submariner
|
|
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,772
|
|
I've done it. This is how I did it:
I started with my flat Corian board covered with 220 grit. I then cut a piece of straight, 1/4" basswood or birch dowel approx. 6" longer than what I need. I'm right handed, so using the meaty part of my left palm as a guide I hold the dowel in my right hand and pull the dowel across the 220, repeating until half of the diameter is scraped off. It takes a while, but it's not terribly hard to do.
The key is having the 220 grit taped to an absolutely flat surface.
__________________
Never trust an atom. They make up everything.
4 out of 3 people struggle with math.
Chemically, alcohol IS a solution.
NAR# 94042
SAM# 0078
|