Thread: ABS epoxy?
View Single Post
  #1  
Old 03-26-2016, 01:36 AM
blackshire's Avatar
blackshire blackshire is offline
Master Modeler
 
Join Date: Jan 2009
Location: Fairbanks, Alaska
Posts: 6,507
Default ABS epoxy?

Hello All,

SpaceX's Falcon 9 and Fairing model rocket kit has numerous ABS plastic parts, as well as clear polycarbonate fins. The kit instructions say to use 5-minute epoxy (drawings of the dual-syringe type of packaging are shown) for ABS-to-ABS, ABS-to-paper, and ABS-to-polycarbonate glue joints. I haven't used much epoxy for building rockets, and I've read (in G. Harry Stine's "Handbook of Model Rocketry") that epoxies with longer curing times are stronger than 5-minute epoxies (plus, the longer "pot life" epoxies allow more time for joining and aligning parts). Is this the case? Also:

The reason why I ask is because LOCTITE, who make several different epoxies (see: http://www.loctiteproducts.com/epoxies.shtm ), make a 20-minute epoxy (see: http://www.loctiteproducts.com/p/13...stic-Bonder.htm ) that's formulated specifically for bonding ABS, polycarbonate, and other plastics (it bonds PVC, polycarbonate, acrylic, ABS, FRP, Nylon™, Mylar™, Delrin, and phenolic, as well as aluminum and stainless steel). I've used their 5-minute epoxy for non-rocketry work, and their 20-minute Epoxy Plastic Bonder sounds like a good one for building the Falcon 9 kit (plus, it's readily available locally).

Many thanks in advance to anyone who can help!
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see:
http://www.lulu.com/content/paperba...an-form/8075185
http://www.lulu.com/product/cd/what...of-2%29/6122050
http://www.lulu.com/product/cd/what...of-2%29/6126511
All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com.
NAR #54895 SR
Reply With Quote