View Single Post
  #2  
Old 03-14-2016, 02:54 PM
kevinj's Avatar
kevinj kevinj is offline
Not so Junior
 
Join Date: Apr 2009
Posts: 431
Default

It's a tight fit, but as long as you put the ends on the torque rods before you glued the wing on, you should be able to slip the linkages down from the front and over the ends. A pair of hemostats works better than needle nose pliers as described in the instructions.

If you don't have the nylon ends on the torque rods, you'll be needing to cut a hatch in the top over where they are.

kj
Reply With Quote