Ye Olde Rocket Forum - View Single Post - Thrustline Aerospace Mars Probe Plans

Scott,

Attached below is the data for the Thrustline Aerospace Mars Probe from the RockSim file Mars Probe 2a updated:

TLA Mars Probe Parts

Nose cone Estes - Estes - BNC-50Y, Material: balsa Nose shape: Hollow Ogive, Len: 4.3500 In., Dia: 0.9760 In. Wall thickness: 0.1250 In. Body insert: OD: 0.8510 In., Len: 0.5000 In.

Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 8.2500 In.

Body tube Estes - EST 3090 - BT-80, Material: Paper OD: 2.6000 In. , ID: 2.5880 In. , Len: 1.0000 In. Location: 1.0000 In. From the base of Body tube

Launch lug Estes - ESTES 2321 - LL-1/8, Material: Paper OD: 0.1250 In., ID: 0.1130 In., Len: 1.2500 In. Loc: 2.3750 In.

Weight and CG - Custom, Material: Mass: 0.1270 Oz. Location: 1.625 In. From the front of Body tube

Custom Fin set - 4 fins Material: Balsa (0.0938" thick) Radial angle 0 degrees
Point List in mm :
91.7555186690121, 0.
51.3377515489951, 19.8690942300816
66.9186465074749, 44.3974338181835
56.8913378708295, 44.397433818183531.1288679889866, 20.0233605167992
0., 0.

Body tube Estes - EST 3089 - BT-60, Material: Paper OD: 1.6370 In. , ID: 1.5950 In. , Len: 0.7500 In. Location: 5.1250 In. From the base of Body tube

Custom Fin set - 4 fins Material: Balsa (0.0938" thick) Radial angle 0 degrees
Point List in mm :
120.525431481326, 0.
59.5120120078977, 7.73239112624671
38.5843592602088, 7.73239112624671
0., 0.

Body tube Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 6.3750 In. From the front of Body tube

Ring - Custom, Material: Paper Centering ringOD: 0.9449 In., ID: 0.7087 In., Len: 0.2500 In. Location: 0.1250 In. From the front of Body tube

Ring - Custom, Material: Paper Centering ringOD: 0.9449 In., ID: 0.7087 In., Len: 0.2500 In. Location: 1.7500 In. From the front of Body tube

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 9.7303 In., Spill hole: 0.0000 In. CG: 0.8109 In. , Mass: 0.0465 Oz.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 1.0000 In., Loc: 7.2500 In.

Transition - Custom, Material: Paper Solid transition: Fwd. Dia: 0.9760 In., Len: 1.0000 In., Rear Dia: 0.7360 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In.