12-27-2013, 11:57 PM
|
|
frustrated aero
|
|
Join Date: Sep 2006
Location: Duncan, OK
Posts: 834
|
|
Quote:
Originally Posted by mikeyd
If you are very carefull, and I used a hair dryer to heat the tube, a BT70 body tube will fit through it. I cut the nose off, and glued a bt70 coupler, then through the body on the fins to a 24mm mount. Works great on E-F engines!
|
I didn't have to heat the tube, the BT-70 was a perfect fit in my crayon...I cut the nose off where the yellow arrow is pointing.
I used clear fins (Lexan from Tower Hobbies), TTW
It's a great flyer!! It has flown on D12 and E9 motors.
|