Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Building Techniques
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-25-2017, 06:35 PM
scott_mills scott_mills is offline
Craftsman
 
Join Date: Dec 2013
Posts: 253
Default Technique needed flattening dowels

I've searched, and can't seem to find a reliable technique to flatten 1 side of a wooden dowel, ie estes Saturn 5 conduit. I've thought that i might take it to work and clamp it, and machine it with a cnc but that sure seems overkill. Maybe a hole drilled in a block of wood, and using a router to flatten a side. Anyone had a successful technique ?
Reply With Quote
  #2  
Old 07-25-2017, 06:45 PM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
 
Join Date: Mar 2005
Location: TN
Posts: 11,610
Default

The easiest way is to chunk it into your scrap wood bin for future use and buy some 1/2 round stock.

http://www.hobbylinc.com/htm/pls/pls90887.htm
__________________
I love sanding.
Reply With Quote
  #3  
Old 07-29-2017, 06:40 PM
luke strawwalker's Avatar
luke strawwalker luke strawwalker is offline
BAR
 
Join Date: Dec 2007
Location: Needville and Shiner, TX
Posts: 6,134
Default

Yeah I bought a bunch of half round evergreen styrene at the hobby shop for just this propose.

OL J R
__________________
The X-87B Cruise Basselope-- THE Ultimate Weapon in the arsenal of Homeland Security and only $52 million per round!
Reply With Quote
  #4  
Old 07-29-2017, 07:46 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

I've done it. This is how I did it:

I started with my flat Corian board covered with 220 grit. I then cut a piece of straight, 1/4" basswood or birch dowel approx. 6" longer than what I need. I'm right handed, so using the meaty part of my left palm as a guide I hold the dowel in my right hand and pull the dowel across the 220, repeating until half of the diameter is scraped off. It takes a while, but it's not terribly hard to do.

The key is having the 220 grit taped to an absolutely flat surface.
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
  #5  
Old 07-29-2017, 07:51 PM
LeeR's Avatar
LeeR LeeR is offline
Retired with Way Too Many Kits
 
Join Date: Jun 2007
Location: Colorado
Posts: 3,222
Default

Jeff,

Did your process also require the use of your Herculean thighs?

Not intending to get personal, just looking for guidance, based on your posts in the past about your Corian board sanding techniques ...
__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp
Reply With Quote
  #6  
Old 07-29-2017, 08:43 PM
GlenP's Avatar
GlenP GlenP is offline
Craftsman
 
Join Date: Dec 2015
Location: NAR BEMRC #627
Posts: 132
Default

I was thinking a router table would work, if you use a straight bit long as the dowel diameter. You just need to use some feather boards to hold the dowel in place against the table and the fence. Drill a square section block at one end to keep it from spinning. Do not remove a full half in one pass, but take several small shallow passes to work up to the final shape. The outfeed fence needs to have a shim that is about the same thickness as what you are removing in that pass. Like you are edge-jointing a panel on the router table. Note that the dowels will probably warp and twist when you cut them as you are releasing stress grown into the wood grain, so I would keep the lengths fairly short, only slightly longer than the final cut needed.

one example for a really large dowel:
http://www.woodworkersjournal.com/f...s-router-table/

http://www.woodworkingtips.com/etips/etip031114wb.html

http://www.finewoodworking.com/2008...gs-featherboard
Reply With Quote
  #7  
Old 07-29-2017, 09:46 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

Quote:
Originally Posted by LeeR
Jeff,

Did your process also require the use of your Herculean thighs?

Not intending to get personal, just looking for guidance, based on your posts in the past about your Corian board sanding techniques ...


My Herculean thighs were not required for the aforementioned operation--the constant rippling of the muscles would have made the Corian board unstable. In this case the Corian board was C-clamped to my bench.
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
  #8  
Old 07-30-2017, 01:53 AM
LeeR's Avatar
LeeR LeeR is offline
Retired with Way Too Many Kits
 
Join Date: Jun 2007
Location: Colorado
Posts: 3,222
Default

Quote:
Originally Posted by jeffyjeep
My Herculean thighs were not required for the aforementioned operation--the constant rippling of the muscles would have made the Corian board unstable. In this case the Corian board was C-clamped to my bench.


Thanks for the clarification, visual images notwithstanding ...
__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp
Reply With Quote
  #9  
Old 07-30-2017, 08:31 AM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

Quote:
Originally Posted by LeeR
Thanks for the clarification, visual images notwithstanding ...


Any time.
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 11:51 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024