Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Vendors
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-19-2015, 12:00 PM
sandman's Avatar
sandman sandman is offline
Custom Cone, Kit & Decal Maker
 
Join Date: Mar 2005
Location: Way North of Detroit
Posts: 5,048
Default More kits on Sandman Decals

While printing a very large decal order today my last Alps printer suffered a damaged printer head.

I'm at a loss right now, I do not know how to proceed and I am quite upset but it was an eventuality I had expected.

I currently have 6 damaged worn out...whatever, Alps printer and I am currently on the lookout for a replacement.

The repairs aren't expensive but the round trip shipping to Japan is about $550 to $600.

I don't want to close down my web site so while I try to figure out if I can or even can afford to repair some printers I will just issue refunds.

Anybody out there have a working Alps printer they are willing to part with?
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/
Reply With Quote
  #2  
Old 01-19-2015, 01:25 PM
kurtschachner's Avatar
kurtschachner kurtschachner is offline
Master Modeler
 
Join Date: Mar 2005
Location: Southeastern Wisconsin
Posts: 1,243
Default

Unfortunately, out of the three I own only one is working or I would. Did you ever buy one of the Kodak printers or just the ribbons?

This has always been a looming issue, those printers are quirky and fragile and as you point out, repairs are nearly unobtanium.

Wanna resurrect the nearly dead skill of decal screen printing?

Quote:
Originally Posted by sandman
Anybody out there have a working Alps printer they are willing to part with?
Reply With Quote
  #3  
Old 01-19-2015, 01:30 PM
Jerry Irvine's Avatar
Jerry Irvine Jerry Irvine is offline
Freeform rocketry advocate.
 
Join Date: Jan 2008
Location: Claremont, CA "The intellectual capitol of the world."-WSJ
Posts: 3,780
Default

I have a UPS-SCS account so they could be shipped by sea for cheap all at once on a pallet. I assume you have to ship the entire printer not some sort of toner cartridge. Why not get all of those fixed all at once so you have few more years till this problem arises again.

If you do this I suggest hoarding other Alps abandoned equipment from folks all over the country mainly near you.

Jerry

Last edited by Jerry Irvine : 01-19-2015 at 02:59 PM.
Reply With Quote
  #4  
Old 01-19-2015, 01:57 PM
sandman's Avatar
sandman sandman is offline
Custom Cone, Kit & Decal Maker
 
Join Date: Mar 2005
Location: Way North of Detroit
Posts: 5,048
Default

Quote:
Originally Posted by Jerry Irvine
I have a UPS-SCS account so they could be shipped by sea for cheap all at once on a pallet. I assume you have to ship the entire printer not some sort of toner cartridge. Why not get all of those fixed all at once so you have few more years till this problem arises again.

Jerry


I emailed "Elephant Rockets", yes, that is the name of the company that fixes Alps printers, and I'm waiting to hear back from them on just what models they can repair out of the six (6) damaged printers I have.

That may determine how I'll proceed.

Unfortunately they are in Japan and I think they are 16 hours behind us so I have to wait to hear.

Not sure what to do yet, this just happened...it was kind of expected but still a disappointment.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/
Reply With Quote
  #5  
Old 01-19-2015, 02:03 PM
sandman's Avatar
sandman sandman is offline
Custom Cone, Kit & Decal Maker
 
Join Date: Mar 2005
Location: Way North of Detroit
Posts: 5,048
Default

Quote:
Originally Posted by kurtschachner
Unfortunately, out of the three I own only one is working or I would. Did you ever buy one of the Kodak printers or just the ribbons?

This has always been a looming issue, those printers are quirky and fragile and as you point out, repairs are nearly unobtanium.

Wanna resurrect the nearly dead skill of decal screen printing?


I never had a Kodak printer and the Kodak ribbon was troublesome at best.

Screen printing is quite impractical for just a few of each made to order.

I have had very good luck with my Alps printer but they are just so fragile and not really designed for production work but there just is absolutely no replacement on the market.

I have some pre printed decals left, some decals I can print multiple copies to a sheet so I have some to sell.

I'm "adjusting" my web site quantities to sell those decals but new prints are out for the time being.

What a PIA!
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/
Reply With Quote
  #6  
Old 01-19-2015, 02:09 PM
mojo1986's Avatar
mojo1986 mojo1986 is offline
Old Canuck Modeller
 
Join Date: Mar 2005
Location: Kingston, CANADA
Posts: 2,160
Default

Gordy, anything here that could help you out?.................

http://www.ebay.com/sch/i.html?_fro...rinter&_sacat=0

Joe
Reply With Quote
  #7  
Old 01-19-2015, 02:14 PM
sandman's Avatar
sandman sandman is offline
Custom Cone, Kit & Decal Maker
 
Join Date: Mar 2005
Location: Way North of Detroit
Posts: 5,048
Default

Quote:
Originally Posted by mojo1986
Gordy, anything here that could help you out?.................

http://www.ebay.com/sch/i.html?_fro...rinter&_sacat=0

Joe


Joe, the ones that seem to have possibilities are on my "watch list" on Ebay but the ones that ship from Hong Kong, forget about it!

The Alps group has pointed out several times to avoid them.

But, Elephant Rocket has had rave reviews.

BTW, I have not and will not post on TRF about this.

TRF has not been that Vendor friendly lately, especially if you don't purchase an ad banner from them.

Let them eat vinyl.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/
Reply With Quote
  #8  
Old 01-19-2015, 02:57 PM
Jerry Irvine's Avatar
Jerry Irvine Jerry Irvine is offline
Freeform rocketry advocate.
 
Join Date: Jan 2008
Location: Claremont, CA "The intellectual capitol of the world."-WSJ
Posts: 3,780
Default

Quote:
Originally Posted by sandman
BTW, I have not and will not post on TRF about this.
TRF has not been that Vendor friendly lately, especially if you don't purchase an ad banner from them.
Let them eat vinyl.
And other less palletable biologic waste matter.
Reply With Quote
  #9  
Old 03-09-2019, 04:28 PM
bernomatic's Avatar
bernomatic bernomatic is offline
Master Modeler
 
Join Date: Jun 2011
Location: Cleveland, Ohio
Posts: 1,174
Default

Quote:
Originally Posted by kurtschachner
Unfortunately, out of the three I own only one is working or I would. Did you ever buy one of the Kodak printers or just the ribbons?

This has always been a looming issue, those printers are quirky and fragile and as you point out, repairs are nearly unobtanium.

Wanna resurrect the nearly dead skill of decal screen printing?



I wouldn't say the art is dead, just coming along slowly. I haven't had the time I wish I could invest in it.

Starport Sagitta Update on Decals

I haven't had any any real inquiries even after posting a link in various places. I guess instant gratification is necessary in today's world and at this time I can't promise delivery in anything less than two weeks, even if it is the correct orange, or printed white. Also I suspect many to expect a high price. I don't even consider what it costs me at this time as I am mostly doing it for the experience. Still, they aren't free.
__________________
Bernard J. Herman Ohio RLS

Starport Sagitta Rockets
email bherman@sagittarockets.com

NAR # 97971 SR

What's your idea on the best way to change Washington D.C.?
Let us know at the Cantina
Sagitta Cantina

We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E.
Reply With Quote
  #10  
Old 03-09-2019, 04:37 PM
bernomatic's Avatar
bernomatic bernomatic is offline
Master Modeler
 
Join Date: Jun 2011
Location: Cleveland, Ohio
Posts: 1,174
Default

Sorry Sandman, I'm not trying to step on your business (or stealing it).

Good to hear you're back up. You do a great job of supplying a great service in a short period of time.
__________________
Bernard J. Herman Ohio RLS

Starport Sagitta Rockets
email bherman@sagittarockets.com

NAR # 97971 SR

What's your idea on the best way to change Washington D.C.?
Let us know at the Cantina
Sagitta Cantina

We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 04:08 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024