|
#1
|
|||
|
|||
Thrustline Aerospace F-19 Night Fighter Plans
The link below will take you to the plans for the F-19 Night Fighter kit.
Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well. http://www.oldrocketplans.com/tla/T...ght_Fighter.zip These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 Last edited by Ltvscout : 02-16-2019 at 12:52 PM. |
#2
|
|||
|
|||
This one looks really cool. The rocksim file has a tailcone that is not in the instructions.
|
#3
|
||||
|
||||
Scott,
Attached below is the data for the Thrustline Aerospace F-19 Night Fighter from the RockSim file: TLA F-19 Night Fighter Parts Nose cone Estes - Estes - PNC-55AC, Material: Balsa Nose shape: Solid Ogive, Len: 5.4030 In., Dia: 1.3250 In. Body insert: OD: 1.2000 In., Len: 0.5000 In. Eyelet steel 3/4" long Walmart - SE3/4 - Eyelet Steel 3/4", Mass: 0.0300 Oz. Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3250 In. , ID: 1.2830 In. , Len: 18.0000 In. Custom Fin set - 2 fins Custom, Material: Balsa (0.125" thick) Radial angle 90 degrees Point List in mm : 312.604239064954, 0. 239.950160035841, 136.007098067183 106.671032413971, 136.054621274942 195.715041655996, 129.850735385131 159.341254835656, 26.2304969064053 0., 0. Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle 30 degrees Point List in mm : 115.049276419563,0. 80.1660158584582, 58.3949028841512 25.5591850653682, 58.4184176559011 58.1961813430679, 56.1351710027286 63.8376811277279, 18.0688640794688 0., 0. Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle -150 degrees Point List in mm : 218.023275467581, 0. 188.248287792668, 25.823650824862 171.653040343636, 25.8177146021537 144.420044715153, 13.0736164750395 0., 0. Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle 150 degrees Point List in mm : 218.023278345489, 0. 188.248290277546, 25.8236511657342 171.653042609456, 25.8177149429475 144.420046621498, 13.0736166476113 0., 0. Body tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 2.7500 In. Location: 0.0000 In. From the base of Body tube Engine block Apogee - EB-50 - , Material: Paper Engine blockOD: 0.9500 In., Hole #1: : 18.7960 In. Len: 0.2500 In. Location: 0.0000 In. From the front of Body tube Ring BMS - CR5055F - Centering Ring 5055, Material: Paper Centering ringOD: 1.2830 In., ID: 0.9780 In., Len: 0.0500 In. Location: 2.5000 In. From the front of Body tube Ring BMS - CR5055F - Centering Ring 5055, Material: Paper Centering ringOD: 1.2830 In., ID: 0.9780 In., Len: 0.0500 In. Location: 0.2500 In. From the front of Body tube Engine Hook. Reg 18mm Thrustline - EH-REG - Engine Hook Reg, Mass: 0.0320 Oz. Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 13.5592 In., Spill hole: 0.0000 In. Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle -30 degrees Point List in mm : 115.049276419563, 0. 80.1660158584582, 58.3949028841512 25.5591850653682, 58.4184176559011 58.1961813430679, 56.1351710027286 63.8376811277279, 18.0688640794688 0., 0. Custom Fin set - 2 fins Custom, Material: Balsa (0.125" thick) Radial angle 90 degrees Point List in mm : 56.6972988460998, 0. 51.9117471020853, 19.0798469187087 31.5256963011221, 19.0798469187087 41.7849101782302, 18.3517736758172 32.5377987961673, 6.70249527456312 0., 0. Custom Fin set - 1 fin Custom, Material: Balsa (0.45" thick) Radial angle 0 degrees Point List in mm : 75.7750356041003, 0. 29.8518377251987, 8.45806499324428 25.6121746921125, 9.03884075120131 25.0746237305181, 9.10470782643293 24.5354176525266, 9.15526782413308 23.9949922470094, 9.19047988147534 23.4537842883052, 9.21031553991041 22.9122311832145, 9.2147587681665 22.3707706174881, 9.20380597520573 21.8298402020849, 9.17746601312657 21.2898771194947, 9.13576017000946 20.7513177704038, 9.07872215271166 20.2145974287235, 9.00639806077889 19.0356164723975, 8.83043075386452 18.5405642838543, 8.74986641252027 18.0478046739079, 8.6562969653447 17.5576792202061, 8.54978727436342 17.0705276821051, 8.43041117304861 16.5866877574159, 8.29825141398332 16.1064948483101, 8.15339961149669 15.6302818288144, 7.99595617815612 15.1583788140609, 7.82603025516033 14.2288081010345, 7.44921069133567 11.3114162212943, 6.1761669619945 0., 0. Launch lug Estes - ESTES 2321 - LL-1/8, Material: paper OD: 0.1250 In., ID: 0.1125 In., Len: 1.2500 In., Loc: 7.3750 In. Launch lug Estes - ESTES 2321 - LL-1/8, Material: paper OD: 0.1250 In., ID: 0.1125 In., Len: 1.2500 In., Loc: 13.5000 In. Transition - Custom, Material: Paper Solid transition: Fwd. Dia: 1.3250 In., Len: 1.0000 In., Rear Dia: 0.9449 In. Font body insert: Len: 0.0000 In., OD: 0.0000 In., Rear body insert: Len: 0.0000 In., OD: 0.0000 In.
__________________
Bruce S. Levison, NAR #69055 Last edited by teflonrocketry1 : 02-19-2019 at 07:55 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|