#1
|
||||
|
||||
Come see the Farside (-X) of SEARS
At the November 3rd SEARS launch, conditions finally allowed for the first launch of my Farside-X clone. Perfect skies and minimal winds meant that, after lugging it to the club several times, it would be a go. Perfect conditions, perfect flight. C11-0, B6-0, B6-6. Really good boost from the C11. The first two stages landed between the pad and the LCO table. The sustainer floated down and actually stuck the landing a bit. Love it.
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc. Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin. |
#2
|
||||
|
||||
Wow! So it flies as nice as it looks!
|
#3
|
||||
|
||||
Thanks! It sure did, and, unlike my affinity for streamered Comanche-3s, the chute brings this one down perfectly. No damage.
I'd actually started the day with the 12th flight of my perpetually abused Sky Raider clone. It also stuck the landing (three of them did this day.) D12-5. Nice flight, but a very large half-moon was left in the top of the body tube. You can see the dent in the landing picture below, along with the gash in a fin made on an earlier flight that broke the top quarter inch off of its first plastic nose cone. Think I'll drill some pin holes in the payload section and test the Estes altimeter I received for my birthday with this one.
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc. Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin. |
#4
|
||||
|
||||
Also flown, my Maxi-Icarus clone on an E9-4. Long-burning nice flight.
Still looking for a Lego Batman mini-fig for the payload section. Apparently, Lego mini-figs are a huge thing. Who knew?
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc. Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin. |
#5
|
||||
|
||||
Also also, I flew my Star Orbiter again. On an F15-6, this one seems to float forever. Bought some Es for next time. Finally landed just in front of a very rare Estes Porta-Pot Shot upscale.
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc. Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin. |
#6
|
||||
|
||||
That's a really nice Farside! Did you do the fins in balsa or basswood?
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#7
|
||||
|
||||
Thanks! These are basswood. I'd actually cloned the standard Farside first, with balsa fins. The balsa was so thin I had to fight to keep it from warping. Flew it once, C6-0, B6-0, B6-6. The C6-0 barely got it off the pad. By second stage ignition it was parallel to the ground. Never found the sustainer. The nose cone is Semroc balsa, and I am pretty proud of the way it came out.
I think this may have been the first time I tried straight strips of wood and clothes pins to ensure fin alignment, per your tutorial. Worked great.
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc. Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin. |
#8
|
||||
|
||||
Quote:
Doug .
__________________
YORF member #11 |
#9
|
||||
|
||||
Newbomb,
That’s a beautiful Farside-X! I have a number of B14-0 motors, both Estes and Centuri, but I’m not sure I’d risk sending up an “X” on one. I really want to build one, and the 24mm booster with a C11-0 just sounds like a great way to go. Did you use the Semroc kit as your starting point, or scratch-build yours?
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#10
|
||||
|
||||
Thanks, Lee!
This was a scratch build, completed just before they released the kit. Still might buy the kit to have one in reserve. Tubes, transition and nose cone are Semroc, fins hand cut basswood and internals I already had.
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc. Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin. |
Thread Tools | Search this Thread |
Display Modes | |
|
|