Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Building Techniques
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-10-2008, 09:30 PM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
 
Join Date: Mar 2005
Location: TN
Posts: 11,610
Default Make Your Own Tube Coupler

This has come up several times when people needed couplers they couldn't find or just didn't want to place an order for a couple of couplers. Some folks don't think the couplers are strong enough. Some don't think they can be made round. It's easy to do, and I can make them just as round as the original piece of tube.

I know there seems to be a lot of steps here, but it's actually a very simple process.

1. Start with the same size BT you plan to couple together. Cut a piece of tube off at whatever length you want the coupler to be.

2. Cut it lengthwise and slip it inside the body tube so you can see how much it overlaps. Regular tubes can be easily cut with good scissors or with a hobby knife.

2.5. Draw a reference line inside so you will know how much you need to cut.

3. Cut off the overlap and safe the strip you just cut.

3.a. Some folks like to make the new coupler ends butt together perfectly. This is great when the cuts are perfect, but lends to whopsided (technical term) couplers if the cuts aren't near perfect.

3.b. I usually cut and leave a little gap. The gap can be taken care of later.

4. Gently spread the new coupler without creasing it so that it will want to expand slightly larger than its original diameter when you let it go. This will help you get a nice round coupler in the next step.

5. Put the new coupler material back inside the body tube (short scrap tube is best) and find the little strip you cut out of it. A regular strip of cardboard will work just fine if you lost the original strip or if it's too skinny.

6. Paint a little glue on each side of the new coupler.. You don't want glue to get down to the main body tube. This is one benefit to a perfect fit when you cut the slit, but I'd rather deal with the glue than to try to make a perfect cut.

7. Apply the strip and make sure the new coupler is spread apart and touching the scrap body tube all the way around on both ends.

8. Let glue dry.

9. (Optional) Add thin CA on the inside if you want a stronger and stiffer coupler. (coupler on left in the pic has some CA in it.)

10. (Optional) Put some Fill-n-Finish or Bondo putty in the outside gap if you want a perfectly slick outer surface for special applications.

Photo: As you can see, the left coupler is in the little piece of scrap BT that let me inspect the diameter of the new coupler as the glue dried. This let me make a perfectly round (as round as the BT anyway) coupler. I used some scrap cardboard to glue the coupler on the right because I lost the little strip I cut from the tube. In a perfect world, the strip is best to use because it has the curve of the BT in it already. Coupler on the right has the little gap filled by Fill-n-Finish. My hands were dirty and discolored the goop so it doesn't look like it's filled in the pic, but it is nice and flush.


Last edited by tbzep : 02-12-2008 at 09:11 PM.
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 04:51 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024