#1
|
||||
|
||||
Thinnest Wall Craft type Body tubes.
Who makes the thinnest wall craft 3" and 4" body tubes not counting BT101.
Last edited by Flash : 10-17-2015 at 06:02 PM. |
#2
|
||||
|
||||
Exactly 4"? Estes/SEMROC/Totally Tubular BT-101 is 3.938" with a wall thickness of 0.021".
Not sure who might have a thin walled 3" tube. .
__________________
I love sanding. |
#3
|
||||
|
||||
Estes is the thinnest 3"
|
#4
|
||||
|
||||
Thank you both! That was my guess on three inch. I meant 4" tubes in the HP range above the BT 101. My guess without knowing is, Aerotech is thinner and lighter than Loc?
|
#5
|
||||
|
||||
Quote:
The different "brands" of 4" HPR paper tubing most likely are all manufactured by Euclid on the same mandrels and have the same dimensions. I know it never made any appreciable difference in nose cone fit back when I was doing HPR whether I got paper tubing from LOC, PML, NCR, etc.
__________________
I love sanding. |
Thread Tools | Search this Thread |
Display Modes | |
|
|