#1
|
||||
|
||||
New Patterns -- MARK III (2006)
Another old design, from 2006, is the MARK III. Link to the plan is here. One sheet.
The original RockSim file calls out 1/8" balsa for the fins, but my prototype used 3/32", and that's what I'm going to call out for this sheet.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
OK, for the clueless among us, how do we make use of this file?
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
#3
|
||||
|
||||
Quote:
If someone wants to build one of these designs, Carl can take these patterns and burn a set of fins for them. The patterns are in Corel Draw 10 format, which is the format used by his Krell ray machine. Some of the designs have cuts that are complex, or use multiple pieces to create a single fin. The file allows the fin pieces to be cut more accurately than by hand. Carl will set the price for each set, as some designs use multiple sheets.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#4
|
||||
|
||||
.....
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
|
Thread Tools | Search this Thread |
Display Modes | |
|
|