#1
|
||||
|
||||
Estes Renegade #2109 nose cone
Hi! I'm looking for the length dimension of the PNC-60CP in the Estes Renegade #2109 kit.
It's also included in the Estes PNC-60A nose cone pack, along with the PNC-60MS from the Baby Bertha. Thanks in advance! Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#2
|
|||
|
|||
My RockSim file lists the Renegade NC as146mm overall with a 19mm shoulder. But it gives the part number as PNC60MS. A few seconds checking shows the Baby Bertha NC also listed as PNC60MS but with different dimensions (63.5mm overall, 19mm shoulder).
Hope this helps.
__________________
Clear skies and fair winds, Mike NAR 31689 |
#3
|
||||
|
||||
For the Renegade D Estes 2109 kit, I get an approximate length of 12.1cm not including a 2 cm shoulder. These are approximate as I can't find my mic right now.
__________________
Bernard J. Herman Ohio RLS Starport Sagitta Rockets email bherman@sagittarockets.com NAR # 97971 SR What's your idea on the best way to change Washington D.C.? Let us know at the Cantina Sagitta Cantina We're looking for a few good Catos, please tell us about any you may have had. Survey of Anecdotal Malfunctioning Engines or S.A.M.E. |
#4
|
||||
|
||||
Quote:
We have discussions around the "Return to Snake River" shop about metric vs. English/standard units. Usually that involves Newtons vs. foot-pounds of thrust. I remember being in 4th grade in 1972, and the teacher told us, "The US will be going metric by the time you graduate in 1980, so you're going to need to learn it now." --The best laid plans... So anyway, converting Mike's measurements from millimeters to inches gives us this: The Estes Renegade's PNC-60CP is 5.75" long, with a 0.75" shoulder. Baby Bertha's PNC-60MS is 2.5" long, *also* with a 0.75" long shoulder. Thanks for your help! Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
Thread Tools | Search this Thread |
Display Modes | |
|
|