#1
|
|||
|
|||
Titan 3E information needed?
Hi to all of you out there.
I have gotten a set of plans of the Titan3E from JimZ I also found a listing of what body tubes was used in that plan but i do not remember where i saw it at if anyone also may know where that is i would love to find that web site again! The lisitng as i copied show the Titan 3E as follows just the body tubes: Bt-70 - 6.25"Long Bt-60 - 13.313" Long Bt-60 - 10.375" Long (2) Bt-50J - 2.75" Long Bt-50S - 4.00" Long (2) Bt-5 - 3.74" Long (2) Bt - 950 - 6.25" Long (2) ????? I have narrowed down the BT-950 Semroc has it as something else(st-9180) and the ID and OD are the same so i shal see how this goes. I have not ordered any of the tubes till i was done doing my research and if there is anyone who knows which is the right or wrong ones for this build i would love to hear from you. I am using the Titan 3E Kit #2019 for my reference from JimZ plans they are a tiff set of plans not a PDF file so im hoping for a close realization for shroud and fins marking guides and for fins drawings to make my parts. I know i can never get the display parts made from plastic so that part is out but the toughest part right now is finding the: payload nose cone and adapter booster nose cones and nozzles Catalyst tank nose cones and tail cones I have some guesses on what i can use as replacments for them but these are just guesses for now. if anyone has built this from scratch i am open to ideas. It is a shame that Estes did not continue to list parts as time went on for future reference for us rebuilders! Once i have the Body tubes in hand then i will have to order the die cut centering rings! Well Thank You for letting me place this out there and i hope you all have a Happy New Year Mike |
#2
|
||||
|
||||
Not sure what web site you misplaced. So here's some of the important ones.
JimZ's main site http://www.spacemodeling.org/JimZ/index.htm JimZ's Titan II E http://www.spacemodeling.org/JimZ/est2019.htm Ninfinger's for tube sizes http://www.ninfinger.org/rockets/body_tubes.html SEMROC for tubes http://www.semroc.com/Store/Scripts/default.asp And way down below in my signature is me for decals. I also have all of the plastic parts including the engine nozzles so I can duplicate them. Now there are 8 plastic parts not including the two main engine bells so that is a lot of parts, they're not very big but there are a lot of them and a lot of work so they won't be cheap. But I can do it.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#3
|
||||
|
||||
You can get the payload nosecone and transition direct from Estes as part of the TARC large parts assortment. You will also get enough BT-70, BT-60 and BT-50 in that pack to make a Titan IIIE.
All for $25. http://www.estesrockets.com/rockets...arts-assortment kj |
#4
|
||||
|
||||
Quote:
That's a deal. Get that!
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#5
|
||||
|
||||
OK, just to throw a monkey wrench into things...I also make (and have in stock) a different nose cone for the Titan III.
If you want to build both, just get more parts.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#6
|
|||
|
|||
Sandman
Guess you dont want me to ever finish my Titan IIIE do you?
Ok what does that neat nose cone run? And i found that listing for the body tubes for the kits i want to build! It is the Estes Body Tube / Kit Reference Dated February 21.2008 By John Brohm Revision 3.1 |
#7
|
||||
|
||||
Quote:
The X-20 nose cone is on my web site in the Roachwerks Custom Machining kits section. It includes decals.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#8
|
||||
|
||||
If you want to work up a display engine for the Titan get in touch with Real Space models and see if Glenn is willing to part with a set of bells and thrust structure from the 1/72 Titan. He may also have the skirt up his sleeve.
__________________
Gravity is a harsh mistress SAM 002 NAR 91005 "The complexity of living is eminently favored to the simplicity of not." |
#9
|
|||
|
|||
Thank You
Thanks jharding58
for the info i will look up real space models and check with him and see if he will part with a copy! Mike |
#10
|
|||
|
|||
Nose Cone
Thanks sandman i saw it but i think im going to stay put with the origional with this first build but i might get it later and do a change after i launch it the first time!
|
Thread Tools | Search this Thread |
Display Modes | |
|
|