Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Vendors
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-23-2013, 10:58 AM
AeroTech's Avatar
AeroTech AeroTech is offline
Manufacturer
 
Join Date: Dec 2009
Posts: 142
Default AeroTech Releases Two New DMS™ Motors at NSL Launch in Pueblo, CO

AeroTech Information Release 5/23/2013

AeroTech Releases Two New DMS™ Motors at NSL Launch in Pueblo, CO


AeroTech is introducing two new motors in its DMS™ Disposable Motor System™ line of adjustable delay and ejection single-use motors at the NAR's upcoming NSL launch in Pueblo, CO, the 29mm G80T-14A and H195T-14A.

G80T-14A Motor Data:
Total impulse: 137 N-sec (30.8 lb-sec)
Burn time: 1.7 sec
Peak thrust: 24 lbs (109 N)
Delay time: 14 sec max (adjustable)
Propellant wt.: 62.5 grams (2.2 oz.)
Loaded wt.: 128 grams (4.5 oz.)
Propellant: Blue Thunder™

H195T-14A Motor Data:
Total impulse: 230 N-sec (51.7 lb-sec)
Burn time: 1.16 sec
Peak thrust: 57 lbs (254 N)
Delay time: 14 sec max (adjustable)
Propellant wt.: 107 grams (3.77 oz.)
Loaded wt.: 196 grams (6.91 oz.)
Propellant: Blue Thunder



The G80T and H195T motors are TRA certified and can be purchased and used by flyers attending NSL (customers purchasing the H195T must possess NAR or TRA Level 1 certification at a minimum). They are competitively priced with existing reload kits at $19.99 each retail for the G80T, and $29.99 each for the H195T.

The time delay of DMS motors may be shortened using AeroTech's new Universal Delay Adjustment Tool, which is being provided free of charge to each customer who purchases one or more DMS motors (one free tool to a customer, please).

Motor performance data including a sample time-thrust curve are printed on the motor label.

DMS motors are packaged in a distinctive yellow shipping tube with AeroTech logos printed on the outer spiral wrapping, and the same motor label applied to the outside of the tube for easy identification and performance evaluation by the flyer. Caps on the ends of the tube are applied externally and are easier to remove than internal caps that are stapled to the tube.



The motors feature a glass-reinforced composite phenolic nozzle, a new molded plastic bulkhead and ship with a FirstFire igniter and a molded (G80T) or bonded (H195T) thrust ring.

DMS motors are different from previous and existing reloadable and single-use motors in the following important ways:

• No hardware to buy, load, clean or lose
• High strength, light weight filament-wound fiberglass or molded glass-phenolic casings
• User adjustable time delays in 2 second increments
• User adjustable ejection charge- no more "one size fits all" charges
• High reliability due to less potential for user error while retaining superior customer adjustability
• Low cost

Other DMS motors which will be released soon include the 38mm I140W-14A and J270W-14A, which are in the process of certification testing. These motors are perfect for Level 1 & 2 certifications and general sport flying and will also be priced competitively with similar reloads.

The DMS motor design and the Universal Delay Adjustment Tool are patent pending.

AeroTech`s DMS line ushers in a new era of ease of use, low cost and spectacular performance to the modern hobby rocketry market.

"DMS- When you just want to fly!™"
__________________
For warranty questions & issues please contact Karl at warranty@aerotech-rocketry.com
For customer service questions & issues please contact Jenn at customerservice@aerotech-rocketry.com

AeroTech Consumer Aerospace
Division of RCS Rocket Motor Components, Inc.
2113 W 850 N
Cedar City, UT 84721
435-865-7100 (Ph)
435-865-7120 (Fax)
http://www.aerotech-quest.com
http://www.rocketmotorparts.com.com
http://www.specificimpulse.com
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 11:59 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024