#1
|
|||
|
|||
Estes Spitfire SSI Resurrection
A few months ago I found an old Estes Spitfire SSI on the side of the road. Although the body tube and nose cons were in good condition, the fins were destroyed. I managed to get new decals from Estes, but they did not send fins because the rocket has not been made since 2002.
Does anyone have a fin pattern I can download or does anyone have a spare fin sheet I can have so I can rebuild this rocket? |
#2
|
||||
|
||||
Quote:
For everyone's benefit, this was not a separate kit release, but was part of a two-kit starter set called "Mega Maxx". It has a BT-50 nose cone with canopy and finlets, can't tell from the catalog picture if this is a modified 50K or 50Y. Catalog number was #1474. Jon, when you say the fins were destroyed, you mean there was nothing left that could be scanned or traced, right?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
|||
|
|||
One fin was OK but upside down (due to the previous owner) and had to be cut off. The other two were just stubs of wood and were completely un-salvagable.
|
#4
|
||||
|
||||
Quote:
Craig; The nose used in the Spitfire is the same as the one found in the older #2010 Star Rider and the #2175 Nemesis (and it can still be found on occasion in the PNC-50 nose cone assortment). It's a blow molded nose with integral canards/finlets, P/N 071005. There is, as of yet, no known PNC designator for this part. Oddly, Estes has assigned the same part number to this nose cone as was assigned to the older, and completely dissimilar, PNC-50CA (the bulbous Alien Invader nose cone, kit #1281).
__________________
John YORF #003 SAM #004 |
#5
|
|||
|
|||
SPitfire Fin pattern and stickers
I got the fin pattern .pdf and stickers .jpg for the Estes Spitfire SSI. The rocket kit came in an Estes Estate Auction on Ebay!
Hope this helps (a year latter). Scott |
#6
|
|||
|
|||
Um, the Spitfire has been done for months now... thanks anyway.
__________________
[jonrevProjects] |
#7
|
|||
|
|||
Spitfire
Well that good news.
How about posting a picture? I have the kit still in the bag and will probably build it out this winter, I have the instructions but no color pictures of the final product. Scott |
#8
|
|||
|
|||
__________________
[jonrevProjects] |
Thread Tools | Search this Thread |
Display Modes | |
|
|