Anyone know if these are sold anywhere? It was used on the Sentinel and Firehawk to name a couple.

__________________
Quando Omni Flunkus Moritati

And Raven, and Magnum...

I've got two in-use, but they were scavanged from previous kits. One of them is in post-scavenge, pre-primer condition; it could be used as a master to create a mold from.

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

And Mega Sizz, and Sizzler, and National Aerospace Plane.

__________________
Bill Eichelberger
NAR 79563

http://wallyum.blogspot.com/

I miss being SAM 0058

Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle

In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III

Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2

If you're looking for them to use in kits, you're probably better off sending one as a sample to Carl and having him make balsa versions for you. His balsa versions of Centuri plastic cones look purdy darn good.

I'm not sure there's anywhere you can get that particular plastic cone in bulk.

__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558

Yea, I wasn't clear in my post. I know it was available in many OOP kits. I was wondering if anyone was producing copies. Carl? Can you shake one out of the Krellvinator?

I'll check my BMS catalog I have stashed somewhere. *shuffles through folders*

__________________
Quando Omni Flunkus Moritati

It's not listed in the BMS 2005 catalog, Buzz.

If Carl wants to use mine as a pattern, it's available. I wouldn't mind having a source of this cone for a few clones. Pete Alway used it for a BT-60 version of the Aerobee-Hi, and that was a great flying model on a D12. I've wanted to do another one of those for a long time...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

Count me in. I'd also like to have a couple of them for different projects. Balsa, plastic, I'm not picky.

__________________
Bill Eichelberger
NAR 79563

http://wallyum.blogspot.com/

I miss being SAM 0058

Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle

In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III

Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2

Yup, me too. If you're listening, Carl, I'd take a couple or three.

Sean

And as if Carl needed any more encouragement to produce this nose cone, check out the latest reason to pick up one of these in the "Scrounged-Up Designs" thread in the "Projects" area...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635