|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
||||
|
||||
WANTED: Estes Polaris (1324)/Cold-Power Marauder (KL-3) Fin Scans & Infot
Ok, working on a sim of the Estes Polaris (1324). I received a scan of the instructions from Doug Bertelesen of it, and I've seen the JimZ's page for it (plans.rocketshoppe doesn't have the Polaris). Problem is, Doug didn't have the fins to scan, and JimZ's image of the fins looks like a scan of a bad photocopy of the fin. It gives the length, but is very grainy, and in my opinion not very trustworthy for an accurate sim.
Found that the Polaris used the same fin pattern as the Estes Cold-Powered Convertible kit the Marauder (KL-3). JimZ's doesn't have that, and the info that plans.rocketshoppe has leaves much to be desired. So, I'm looking for a scan of the fins (BF-L3 (PN 32254) from either the Estes Polaris (1324) or their Marauder (KL-3), along with a ruler for scale. In matrix or out of it is OK. If it's out of the matrix, the ruler is best along the root edge of the fin. Thanks to the Estes Custom Parts Catalog, I know that the fins are 3/32" thick. I could also use the width/height of the widest blue band of decal for the Polaris (I can scale what JimZ has from that), and while I'm at it, the width/height of the black bars for the Marauder. Online resources cited: http://www.spacemodeling.org/jimz/est1324.htm http://plans.rocketshoppe.com/estes/estKL-3/KL-3.pdf http://www.spacemodeling.org/jimz/manuals/estp741.pdf
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#2
|
|||
|
|||
Jim, according to my spread sheet, I have the 2174 Polaris.
Would this be the same one? Estes instructions page has the one your asking for, but not mine. Mine's all boxed up, but here in the apartment. So off hand, I don't know if they are the same. |
#3
|
|||
|
|||
Quote:
That's the later version. http://www.rocketryforum.com/showth...-Polaris-(-1324) There's an upscale of the 1324 in this thread. I've got an upscale that I did using one of my Phoenix Bird kits, but I've yet to paint and decal it.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Design Contest F-150 Hurricane Estes - Low Boom SST Semroc - Gee'Hod, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Solar Sailer II Semroc Cyber III Ready to fly: Estes - Multi-Roc, Solar Sailer II Semroc - Earmark, Snake Jumper |
#4
|
||||
|
||||
Woody,
Bill's right, they are two totally different beasts (that just happen to share a name). Thanks for checking though.
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#5
|
||||
|
||||
I might have the original cold power kit. I'll have to get to the box my unopened kits are in. I'll try to get to it tomorrow.
|
#6
|
||||
|
||||
Thanks!
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#7
|
|||
|
|||
I submitted the plans to Scott a while back. Here is the link.
http://www.oldrocketplans.com/estes/estKL-3/estKL-3.htm
__________________
Quando Omni Flunkus Moritati |
#8
|
||||
|
||||
Looks like I don't need to dig out that box today........
|
#9
|
|||
|
|||
I just compared the two plans/instructions sheets. The Polaris and the Marauder are the same rocket. The only significant change is the Polaris had a plastic nose cone and the Marauder had a balsa one. Sort of like the Jinx, which was the old Firing Line Vampire molded in purple instead of black plastic.
__________________
Friends Don't let Friends Do TRF |
Thread Tools | Search this Thread |
Display Modes | |
|
|