|
|
Thread Tools | Search this Thread | Display Modes |
#21
|
||||
|
||||
I'm sure there are others that will be there competing that don't visit forums or FaceBook
John Boren |
#22
|
||||
|
||||
Quote:
In my best Spock impersonation, including one arched eyebrow: "Fascinating."
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#23
|
||||
|
||||
I think up-scaling the Boost-Glider version of the Estes BOMARC to 38mm "J" power and ejecting the pod just like the smaller version would be cool.
R/C glide recovery, needless to say. Better yet would be upscaling the Centuri Argus and flying in a SCALE fashion (1st stage vertically upward, 2nd and 3rd stages vertically DOWNWARD for a max-velocity impact with terra-firma). Deliberately deceive the RSO as to what engines are in each stage.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#24
|
||||
|
||||
I did a 3" dia. upscale of the Estes Scissor Wing Transport 20+ odd years ago. I flew it on a I 282 or something similar. It was not RC. All I can say is to keep the weight down as much as possible. My Scissor Wing flew like a brick.
John Boren |
#25
|
||||
|
||||
What hardware do you use to print decals John?
Quote:
|
#26
|
||||
|
||||
John,
Check out the cockpit lighting, particularly the pilot's display, on this Viper. https://www.facebook.com/groups/sta...54458403181319/
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#27
|
||||
|
||||
WOW that was cool.
John Boren |
Thread Tools | Search this Thread |
Display Modes | |
|
|