Any interest in AeroTech bringing back the 'B' and 'C' reloads for the RMS-18/20 case?

__________________
AeroTech Division, RCS Rocket Motor Components, Inc.
2113 W 850 N
Cedar City, UT 84721
http://www.aerotech-rocketry.com
http://www.facebook.com/pages/AeroT...ce/159005948954

Actually I would be very interested in them, especially the "C" which I presume would be a full 10n-sec C.
Even better than the B or C would be the "baby E" you used to offer.
That one would be great in high-drag 18mm model rockets such as the Estes Space Shuttle and the Semroc Mars Lander.
Any chance for that "baby E" making a comeback ???

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC !

I'd love to see choices in the 18mm range, so I'm definitely be interested in the smaller reloads. B and C composites would be great for demo flights too, providing a bit more than the typical blackpowder *whoosh*. High thrust or longer-burning motors, if they could be made, would be great for gliders or general competition events.

__________________
David Hash
NAR#77967
http://www.Semroc.com

I assume you mean the E27T? Why not!

__________________
AeroTech Division, RCS Rocket Motor Components, Inc.
2113 W 850 N
Cedar City, UT 84721
http://www.aerotech-rocketry.com
http://www.facebook.com/pages/AeroT...ce/159005948954

Yes! I'd love to have a better selection of 18mm reloads.

Mario

It's possible that an endburning 'D' could be produced in booster and one time delay variations.

__________________
AeroTech Division, RCS Rocket Motor Components, Inc.
2113 W 850 N
Cedar City, UT 84721
http://www.aerotech-rocketry.com
http://www.facebook.com/pages/AeroT...ce/159005948954

Oh for sure! I just got my first 18mm reload case and some "D" reloads. Some "B's"& "C's" would be great. 18mm E's? Nice!

__________________
Enjoy life, it has an expiration date.

Go for i t Gary!. I would love to see BC reloads. BCD Endburners would be fantastic.

as would B14 or C15.

terry dean

__________________
"Old Rocketeer's don't die; they just go OOP".....unless you 3D print them.

Oh, DEFINITELY! With the price of BP motors going up, the composites only get more and more competitive. The composites performance would be out of the ball park compared to BP as well...

It'd be nice to see somewhat of a 'wider spread' in performance; bring back some of the 'old performance' type motors that have gone by the wayside, IE C5's (longer burn) and B14 type motors (high thrust) in composites... the premium on composites would help pay production and development... heck even if they sold at a premium above 'normal' C-D-E 18mm composites, I'm sure there would be folks who'd buy them...

I'd say 'go for it'... it would help bring more folks into the composite fold and be a good introduction to moving up the power ladder from there...

Good luck! OL JR

__________________
The X-87B Cruise Basselope-- THE Ultimate Weapon in the arsenal of Homeland Security and only $52 million per round!

Yes , yes and yes!

More loads for the 18mm case would be great for all the above mentioned reasons!

.

Man I love rocketry right now!

.

__________________
http://hotrodrockets.weebly.com/
Ring Master of the Flying Circus!