|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
New Scans of Estes D-Region Tomahawk (1944)(BT-60) Fins w/ruler
For clarity, this is a request for the BT-60 based D-Region Tomahawk (1944)(ca. 1985-1986), and not the 1.8" OD version (2037) (with plastic fin can from a few years ago). At this time, the later version is beyond my ability to simulate properly due to the nature of the plastic parts (unless someone has one they can send me ).
I've been to JimZ's site , and the scans of the fins are incomplete. There's no indication of what the dimensions of the fins are (except for the fin gussets, which is contained in the instructions). I need to know the width of the balsa, and the length of the fin root. Ideally, someone has an opened, unbuilt one that they can scan the fins for me (preferably with a ruler to ensure accuracy). Also while the scans of the decals on JimZ's are large and well done, there's no indication of scale for them. I can use them as is, if someone could measure the width of one of the wraps. There's one issue that I'd like to confirm with someone... The "brown band" looks to be black from the scan is this an accurate observation?
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#2
|
||||
|
||||
Quote:
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#3
|
||||
|
||||
Your root is 4" right on the nose.
Tip is 1.8125" Thiokol on the decal is a shade more than 1.25" across the top. Balsa stock is 1/8" I don't know the length of the wraps. Mine came apart in water and I ended up painting the bands.
__________________
NAR 79743 NARTrek Silver I miss being SAM 062 Awaiting First Launch: Too numerous to count Finishing: Zooch Saturn V; Alway/Nau BioArcas; Estes Expedition; TLP Standard Repair/Rescue: Cherokee-D (2); Centuri Nike-Smoke; MX-774 On the Bench: 2650; Dream Stage: 1/39.37 R-7 |
#4
|
||||
|
||||
The June 1971 issue of Model Rocketry magazine contains scale data for the D-Region Tomahawk...the dimensions of this model should correspond, especially the bands, and yes that is brown.
|
#5
|
||||
|
||||
Quote:
Thanks for the info. Quote:
Nice! Thanks for that! Funny thing... I just looked at my sim, and I had the length of the fins as... 4.0 inches exactly! Cool!
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#6
|
||||
|
||||
Quote:
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#7
|
||||
|
||||
Quote:
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
Thread Tools | Search this Thread |
Display Modes | |
|
|