Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Rocket Boosted Gliders
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-14-2017, 05:07 PM
burkefj's Avatar
burkefj burkefj is offline
Craftsman
 
Join Date: Feb 2009
Posts: 462
Default Orion Starliner RC RG

Something I've been working on. I used the general wing planform from the 2001 orion III shuttle design, but then added a appropriately shaped vertical fin(which doesn't exist on the 2001 shuttle) and used estes PS-II 2" tubing and the standard estes PSII 9.5" cone. I angle cut the rear to give the look I wanted and also to push the motor mount forward. I did not use centering rings but used a notch cut in the vertical fin tab to hold the motor mount. The vertical fin tab also locks through a notch in the wing. I played with wing location and CG to optimize the wing location and wound up with a 9.75 oz rtf model with no nose weight needed. I painted it in a shuttle like black bottom and leading/trailing edge pattern using testors flat black, then did some line markings with a sharpie and added accents on the vertical fin and wing using trim vinyl. Test flights showed a very nice boost to around 700' and a really nice glide with easy flare on landing using an E-6.

Wingspan is 25" and length is 36.5" 2" diameter.

I decided to go with TWA markings since I already have a Pan-Am marked model and "Trans World" seemed more appropriate for a space plane....

Boosts to 600-700'

Flight video here: http://www.youtube.com/watch?v=aYxOJCGfFwU&t=11s

Some flights the day before which had 10mph with 20mph gusts.....http://www.youtube.com/watch?v=CyRXuzCg_9o
Attached Thumbnails
Click image for larger version

Name:  WP_20170913_16_46_19_Pro.jpg
Views: 82
Size:  123.6 KB  Click image for larger version

Name:  WP_20170913_16_46_47_Pro.jpg
Views: 62
Size:  131.3 KB  Click image for larger version

Name:  WP_20170913_16_46_54_Pro.jpg
Views: 76
Size:  127.0 KB  
__________________
RC Rocket glider kits
www.dynasoarrocketry.com
Reply With Quote
  #2  
Old 09-25-2017, 09:22 PM
burkefj's Avatar
burkefj burkefj is offline
Craftsman
 
Join Date: Feb 2009
Posts: 462
Default

I just finished a 1.5x upscale using 3" BT-300 and a pnc-300 from BMS along with a doubled thickness wing and tail. I built it for 32mm G-12 motors, dry weight rtf is 22 oz, 26.5 oz with a G-12, no nose weight was needed. Mark at stickershock did an upsized version of the markings he did for my smaller version and they look great. 55" long, 37" wingspan. I have plans on my dynasoar website including instructions if anyone wants to reproduce it. Maiden will wait for my casing/reloads to arrive, but it's a direct scale up and I don't expect any surprises.

Frank
Attached Thumbnails
Click image for larger version

Name:  WP_20170921_20_32_51_Pro.jpg
Views: 48
Size:  284.0 KB  Click image for larger version

Name:  WP_20170921_20_53_54_Pro.jpg
Views: 46
Size:  313.7 KB  Click image for larger version

Name:  WP_20170921_21_09_14_Pro.jpg
Views: 47
Size:  509.7 KB  Click image for larger version

Name:  WP_20170921_21_50_49_Pro.jpg
Views: 46
Size:  311.3 KB  Click image for larger version

Name:  WP_20170922_18_33_21_Pro.jpg
Views: 45
Size:  296.9 KB  Click image for larger version

Name:  WP_20170923_08_07_05_Pro.jpg
Views: 46
Size:  416.5 KB  Click image for larger version

Name:  WP_20170923_08_07_19_Pro.jpg
Views: 55
Size:  273.8 KB  Click image for larger version

Name:  WP_20170924_15_06_00_Pro.jpg
Views: 49
Size:  468.3 KB  Click image for larger version

Name:  WP_20170925_17_50_24_Pro.jpg
Views: 62
Size:  475.7 KB  Click image for larger version

Name:  WP_20170925_17_54_03_Pro.jpg
Views: 48
Size:  652.7 KB  

__________________
RC Rocket glider kits
www.dynasoarrocketry.com
Reply With Quote
  #3  
Old 09-26-2017, 07:32 PM
neil_w's Avatar
neil_w neil_w is offline
Mr. Cut-by-hand
 
Join Date: Nov 2015
Location: Northern New Jersey
Posts: 439
Default

Would you expect the upscale to glide better or worse than the smaller one? I would assume it involves various ratios of weight, wing area, and this and that.

Just don't ask me what I mean by "glide better or worse" because I'm hoping you can tell me.
Reply With Quote
  #4  
Old 09-26-2017, 07:54 PM
burkefj's Avatar
burkefj burkefj is offline
Craftsman
 
Join Date: Feb 2009
Posts: 462
Default

At 1.5x you have 2.25x the wing area, so wing loading in this case is similar,slightly higher for the large version, however larger aircraft tend to fly slower than a direct scaling would indicate, a more useful relative comparison is the cubic wing loading, or weight in ounces divided by the wing area in sq feet raised to the 1.5 power. It allows a more direct comparison of how different size models will fly, in this case the small model is 8.6, large model is 6.8, my hypersonic delta wing is 6.54, so it should be
closer to the slower gliding plane.

In the end they are a flat plate wing sport flyer that looks cool and will never be a competition duration glider but that's not what I wanted.
__________________
RC Rocket glider kits
www.dynasoarrocketry.com
Reply With Quote
  #5  
Old 09-27-2017, 08:33 AM
AstronMike AstronMike is offline
Craftsman
 
Join Date: Sep 2007
Location: Lakeland, FL
Posts: 224
Default Glider Upscaling

Quote:
Originally Posted by neil_w
Would you expect the upscale to glide better or worse than the smaller one? I would assume it involves various ratios of weight, wing area, and this and that.

Just don't ask me what I mean by "glide better or worse" because I'm hoping you can tell me.


In my experience with doing these sorts of things, I find that if the 'original sized' glider does well, an upscale will as well - sometimes better!

Now, as far as wing loading goes, the larger the glider, the LESS important this becomes. In fact, once you get to HPR sizes, something I call *Boost Loading* comes into play. That is basically the 'on pad weight' versus the wing area, and 'higher BL' birds tended to boost straighter - even in the 15-20mph winds I used to fly the Classic Astron SST in.

On a related note to wing loading, having a lower net WL on the upscale does NOT always portend to a better flying glider. Sometimes, yes, but not always. I've had upscale flexie RGs that did not glide nearly as well as their smaller counterparts (flex wings don't really like to carry all that extra 'rocket weight').

Sometimes you just throw out all the math and 'wet thumb' it!
Reply With Quote
  #6  
Old 10-04-2017, 12:03 PM
burkefj's Avatar
burkefj burkefj is offline
Craftsman
 
Join Date: Feb 2009
Posts: 462
Default

Here is the flight video from yesterday. Boost to around 600' or so.

http://www.youtube.com/watch?v=KXpDShKZP2M

Parts tracings/parts list and instructions are at: http://www.dynasoarrocketry.com/ori...ttle-plans.html
__________________
RC Rocket glider kits
www.dynasoarrocketry.com
Reply With Quote
  #7  
Old 10-17-2017, 12:02 PM
burkefj's Avatar
burkefj burkefj is offline
Craftsman
 
Join Date: Feb 2009
Posts: 462
Default

Sent a Beta version of a kit to Mark Hayes for evaluation, it is using the flite test water resistant foam board for the wings/tail. Since the paper covering is brown it does require paint, and it is sensitive to the type of paint like depron is. Also, it needs some scuffing prior to paint application, and CA and epoxy don't stick well to it so you need to use beacons foam-tac or bob smith foam cure, which is not very expensive, just different. Weight for the foam board version is .5 oz heavier than depron, just due to the paint weight.

Here are the two versions, flite test foam board in Pan Am colors and depron in TWA colors. 9.75 oz for depron, 10.25 for flite test foam board.
Attached Thumbnails
Click image for larger version

Name:  WP_20171016_16_34_09_Pro.jpg
Views: 47
Size:  428.8 KB  Click image for larger version

Name:  WP_20171016_16_34_39_Pro.jpg
Views: 54
Size:  413.3 KB  
__________________
RC Rocket glider kits
www.dynasoarrocketry.com
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 06:47 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024