Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Building Techniques
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-03-2010, 11:53 AM
GregGleason's Avatar
GregGleason GregGleason is offline
U.S. Manned Space Program Buff
 
Join Date: Mar 2009
Location: Houston
Posts: 1,298
Default Sanding Sealer Process Questions

I recently got some Deft sanding sealer (must be GREAT stuff, since it is so ... so ... uh ... aromatic) and put it on some pine.

Two of my sons are cub scouts and are going to put their cars in the January Pinewood Derby.

My questions are:

1) How many coats
2) Do you sand between the coats, or do you sand after multiple-coat applications
3) Do you primer over the sanding sealer or straight to paint (my guess is primer it)

I know this is a basic question but it has been decades since I last used sanding sealer and I wanted to get a sense of the prevailing conventional wisdom.

I know that pine is not balsa, but my guess is that for this phase, you would treat balsa the same as pine (since it is a fairly soft wood).

Greg
Reply With Quote
  #2  
Old 12-03-2010, 11:57 AM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

I think 4 coats should be good. Sand with 320 after each coat. Sand with 400 after the last coat. Tack cloth, primer and paint.

Please post photos!

p.s. I hope they win!
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
  #3  
Old 12-03-2010, 12:48 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 13,443
Default

I doubt you will need four coats.
Pine is about the hardness of Basswood which rarely needs more than 2 coats, 3 max.
Sand between each coat.
Paint may be applied directly over the Sealer for an acceptable finish, but will look better if primed first.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !
Reply With Quote
  #4  
Old 12-03-2010, 01:17 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

GH is probably right. I've never finished pine with sanding sealer, but it IS a denser wood, so probably only 3 coats. As far as primering: personally I primer EVERYTHING. That's just how I roll. I use white primer under everything except black, and gray primer under black.

I still have my old PWD car. It had a windshield long ago. It was slower than a retarded clam, but it sure was pretty!
Attached Thumbnails
Click image for larger version

Name:  IMG_0792.JPG
Views: 129
Size:  103.4 KB  Click image for larger version

Name:  IMG_0793.JPG
Views: 104
Size:  96.2 KB  
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
  #5  
Old 12-03-2010, 01:45 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 13,443
Default

+1 to what jeffyjeep said about primer.
White under everything BUT black.
For black I use DARK grey (sometimes called hot-rod black) primer.

Incidentally, I NEVER use Balsa Fillercoat prior to Sanding Sealer for any woods but BALSA.
It is a waste.
For Basswood, Aircraft Ply (Spruce), or Lite-Ply (Poplar), I finish ONLY with 1-3 coats of Sanding Sealer depending on what the grain requires.
For balsa, I use 3-4 coats of Fillercoat with sanding between coats 2, 3, and 4 prior to 2-3 coats of Sanding Sealer.

Added Tip: anyone who uses Sanding Sealer prior to Balsa Fillercoat for finishing balsa is doing it BACKWARDS. The Fillercoat should ALWAYS be applied prior to the Sealer to fill the grain, whereas the Sealer provides a smooth plasticized topcoat for the primer/color coats.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, CHAOS, and HAVOC !
Reply With Quote
  #6  
Old 12-03-2010, 02:44 PM
jspitza jspitza is offline
Craftsman
 
Join Date: Jul 2010
Posts: 128
Default

GH Rocketman:
Even SIG sanding sealer is not the first step? Hobby lobby sells this right by the pinewood derby section. That stuff is so thick, I thought its supposed to fill the grain first then use whatever to provide the surface gloss. Also, does dope based products eat wood glue joints? Also, is SIG or any other clear dope even needed in rocketry? I've tried delta creamcoat and fnf: personally I don't like either one and the aerogloss blows em away but that dam smell............. Good luck with your pinewood derby cars!!!!! I'll be cheering(virtually that is) Take care, Jeff
Reply With Quote
  #7  
Old 12-04-2010, 08:54 AM
scigs30 scigs30 is offline
Master Modeler
 
Join Date: Jul 2006
Posts: 2,261
Default

Quote:
Originally Posted by ghrocketman
+1 to what jeffyjeep said about primer.
White under everything BUT black.
For black I use DARK grey (sometimes called hot-rod black) primer.

Incidentally, I NEVER use Balsa Fillercoat prior to Sanding Sealer for any woods but BALSA.
It is a waste.
For Basswood, Aircraft Ply (Spruce), or Lite-Ply (Poplar), I finish ONLY with 1-3 coats of Sanding Sealer depending on what the grain requires.
For balsa, I use 3-4 coats of Fillercoat with sanding between coats 2, 3, and 4 prior to 2-3 coats of Sanding Sealer.

Added Tip: anyone who uses Sanding Sealer prior to Balsa Fillercoat for finishing balsa is doing it BACKWARDS. The Fillercoat should ALWAYS be applied prior to the Sealer to fill the grain, whereas the Sealer provides a smooth plasticized topcoat for the primer/color coats.

I must be doing it BACKWARDS because I never use Balsa Fillercoat, just 3 to 4 coats of balsa sealer for smooth balsa fins. 3 to 4 coats of balsa sealer sounds less than 3 to 4 coats of balsa fillercoat followed by another 2 to 3 coats of balsa sealer. Someone else on another forum told me I was doing it wrong also but I think the results speak for themselves. Feel free to search my builds and I think my balsa parts come pretty good for doing it backwards.
The Vigalante has 3 coats of balsa sealer

Centuri Screaming Eagle clone 4 coats of balsa sealer

Avenger 3 coats of balsa sealer
Reply With Quote
  #8  
Old 12-04-2010, 09:22 AM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

Beautiful work! I don't use ANY filler coat either--just sanding sealer.
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
  #9  
Old 12-04-2010, 12:27 PM
GregGleason's Avatar
GregGleason GregGleason is offline
U.S. Manned Space Program Buff
 
Join Date: Mar 2009
Location: Houston
Posts: 1,298
Default

Very nice work scigs30!

Thanks for posting them.

Speaking of posting, I'll try to get some pics of the process.

Craftsmanship seems to be a never ending process.

I'll likely toss them in the Projects area.

Greg
Reply With Quote
  #10  
Old 12-04-2010, 12:50 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,760
Default

True. I hate to sound esoteric, but craftsmanship IS a journey without end.
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

Chemically, alcohol IS a solution.

NAR# 94042
SAM# 0078
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 09:15 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024