#121
|
||||
|
||||
Centuri KE-001 Nike-Ram - Fins
Now I'm throwing you a curve...
I didn't see this one posted on the SEMROC list of fin sheets, and I know I haven't done one yet, so I'm going to add it to the collection. The fin outlines were taken from SEL's (Sean Lannan) plan pack (location???), which had a photo image of the fins out of their carrier. Main body tubes are a 12.5" and an 8" length of ST-13. The balsa NC equivalent is either the BNC-1327 or BNC-1327S.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#122
|
||||
|
||||
Estes #1339 Space Cruiser Excalibur - Fins
A bunch of wavy lines and hundreds of plot points!
Builds into a nice model, though! I did not include a canopy pattern, as the one posted already is adequate. The fin patterns are two sheets of 4" x 9.6" x 1/8" balsa.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#123
|
||||
|
||||
Estes #1344 Nomad - Fins
This design originally used a two-piece molded plastic fin can. The outline used for this sheet was taken from the outline included with the plan scans on YORP.
I'm suggesting three possible materials - 3/32" balsa, 1/16" basswood, and 0.05" matteboard.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#124
|
||||
|
||||
Quote:
This fin can was also used on the Saros (K-54). In fact, the Nomad is a stretched Saros with different decals.
__________________
'Til next time, Mike Toelle NAR 31692 L1 SAM 0373 |
#125
|
||||
|
||||
Quote:
I thought I remembered that from somewhere... Memory is the second thing to go... I'll make an addition in the pattern list with the next update. Thanks!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#126
|
|||
|
|||
Quote:
Craig, Semroc has the Nike-Ram fins available as part # FEJ-KE1. The ST-13 body tube lengths are 12" and 8".
__________________
Bob S.A.M. # 0014 |
#127
|
||||
|
||||
Quote:
Thanks for the heads-up. I must have passed right over it in the list. ADDENDUM: Correction made to the pattern list. A link to SEMROC's page has been included.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#128
|
||||
|
||||
Estes #1977 GeoSat LV - Fins
Someone with a kit (built or unbuilt) please check these patterns for correct size and shape. The only available image is the plan page [est1977b].
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#129
|
|||
|
|||
Quote:
Craig I measured the fins I have . I have a complete kit. Root 1 11/16" Leading Edge 3 7/16" Trailing Edge 2 7/8" Tip 11/16" Also sent you scan of fins at 200dpi gray scale. There are two other parts you have not scanned 1. The Booster standoffs (2 req. ) 1/4" x 9 7/8" and 2. launch lug standoffs 1/4"x 1.5"( 2 req. ) I can do a re-scan and include these also. Body tubes Length Bt55 18" Bt50 2ea. 9.5" Note this also leads to the question . Was this fin pattern used in any other Estes Kits? John Ludwig
__________________
John NAR #91135 L1 SAM #0037 |
#130
|
||||
|
||||
Thanks guys! The PDF from the other thread fit right into the outline like it was meant to. Once I get the remaining pieces plotted, I'll post a revised sheet.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|