Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Golden Age of Model Rocketry > Plans & Publications
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-11-2019, 11:57 AM
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 6,472
Default Thrustline Aerospace A-SLAM Plans

The link below will take you to the plans for the A-SLAM kit.

Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well.

http://www.oldrocketplans.com/tla/TLA_A-SLAM.zip

These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558

Last edited by Ltvscout : 02-16-2019 at 12:55 PM.
Reply With Quote
  #2  
Old 02-18-2019, 09:03 AM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 264
Default

Scott,

Is this what you are looking for?

TLA A-SLAM Parts
Nose cone Estes - Estes - BNC-70AJ, Material: balsa Nose shape: Hollow Parabolic, Len: 4.4000 In., Dia: 2.2170 In. Wall thickness: 0.1250 In. Body insert: OD: 2.0920 In., Len: 0.7500 In.

Screw Eye - Custom Mass: 0.1000 Oz.

Mass object - Custom Mass: 0.7000 Oz.

Body tube Estes - Estes - BT-70, Material: Paper OD: 2.2170 In. , ID: 2.1800 In. , Len: 17.0000 In.

Forward Fin set - 4 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
173.994064664618 , 0.
178.879782088975, 19.3504870588955
63.5343663748161, 19.1380645621843
0., 0.

Custom Fin set - 4 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
77.5819708016097, 0.
70.4810164384136, 39.2157286388845
27.4143739061612, 39.2157286388845
6.82003624381552, 20.1978737528717
0., 0.

Parachute - Custom, Material: 1.3 oz. Ripstop Nylon (SkyAngle) 1 parachute, Shape: 6 sided Dia: 20.0000 In., Spill hole: 0.0000 In.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 1.0000 In., Loc: 7.6250 In.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 1.0000 In., Loc: 12.5000 In.

Body tube 1 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 1

Engine hook Estes - Engine hook - Standard size

Body tube 2 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 2

Engine hook Estes - Engine hook - Standard size

Body tube 3 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 3

Engine hook Estes - Engine hook - Standard size

Ring - Custom, Material: Aircraft plywood (Birch) Centering ringOD: 2.1800 In., ID: 0.9449 In., Len: 0.1250 In. Location: 14.3750 In. From the front of Body tube

Ring - Custom, Material: Aircraft plywood (Birch) Centering ringOD: 2.1800 In., ID: 0.9449 In., Len: 0.1250 In. Location: 16.5000 In. From the front of Body tube

Mass object - Custom, Material: 1/4 In. flat elastic
Attached Files
File Type: pdf TLA_A-SLAM_Forward_Fin.pdf (1.6 KB, 22 views)
File Type: pdf TLA_A-SLAM_Aft_Fin.pdf (1.6 KB, 19 views)
__________________
Bruce S. Levison, NAR #69055

Last edited by teflonrocketry1 : 02-19-2019 at 08:00 PM.
Reply With Quote
  #3  
Old 02-18-2019, 11:32 AM
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 6,472
Default

Quote:
Originally Posted by teflonrocketry1
Scott,

Is this what you are looking for?

Yes. Thanks, Bruce!
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 03:28 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024