#11
|
||||
|
||||
Quote:
Really good tip (from one of the best builders around). |
#12
|
||||
|
||||
Quote:
Intersting item here - the Clipper is curently released by Quest in Germany. I saw it at Dusseldorf.
__________________
Gravity is a harsh mistress SAM 002 NAR 91005 "The complexity of living is eminently favored to the simplicity of not." |
#13
|
||||
|
||||
I would use a very thin layer of contact cement on both pieces.
Let it dry COMPLETELY before joining. If you think it is dry, give it more time anyway...double what the bottle/can says. Have done it before and it works really well without any wrinkles.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#14
|
|||
|
|||
"As you can see on this Quest Delta Clipper, I laid a heavy bead of Aleene's around the inside bottom rim of the aeroshroud, but it didn't pucker or distort the outside surface."
Your Delta clipper looks good. Will have to try it. I am guessing you can get it at Hobby Lobby? |
#15
|
||||
|
||||
Quote:
Aleene's Tacky glue can be found at most hobby and craft stores. The Quest Delta Clipper is long out of production, but there may still be a few hanging around in hobby shops. Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
Thread Tools | Search this Thread |
Display Modes | |
|
|