#421
|
||||
|
||||
Quote:
I think that's something we're going to address here in the Studio. Since we use SEMROC components most of the time (well, I do anyway... ), we do need a set of files to cover all of those parts. The biggest issue is the turned balsa parts, as there are literally hundreds of them. This may become our January project, working up the entire (current) SEMROC parts list into RockSim database files. Stay close, as these may be done in small batches and posted here over a few weeks.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#422
|
||||
|
||||
Early Start -- First batch of SEMROC items
Here's the first batch of balsa components -- the Series 5 nose cones.
Only BC-523 could not be included in this list. It will require a special "subassembly" file to use in your designs. I'll try to get those worked up later. Place this file into the "DataImport" folder, then run RockSim. The file will be appended automatically to the existing database. Note: When each section is posted, it will have the same name as the master database file. Do not change the name! BIG ADDENDUM! DO NOT USE THIS FILE. IT CONTAINS AN ERROR IN ONE OF THE FIELDS. USE THE NEW FILE POSTED IN THE FOLLOW-UP MESSAGE.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 Last edited by CPMcGraw : 12-30-2008 at 08:36 PM. |
#423
|
||||
|
||||
Corrections Already!!!
OK, the first CSV file had a slight bug. I'll tell you about it now, and you'll maybe understand where a data error may still exist, but which I think we can live with for now.
In the column "CG Loc", or CG Location, the first post had an incorrect location for every entry. Please note I am guesstimating the location as 71% of the total length, including the shoulder. This may not be fully accurate, but I think it will be close enough to the real position as to not be excessively noticeable. Well, I forgot to add the shoulder length to the cone length. Doh! The new file, below, has been corrected. Also, the file name shows which series you will be installing. When you save this file to the "DataImport" folder, be sure to rename it "NCDATA.CSV", otherwise it will not install correctly. Sorry!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#424
|
||||
|
||||
Nose cones as Subassemblies?
Quote:
Craig, the last I knew, Rocksim (8) wouldn't allow nose cones to be subassemblies. Has that changed in RS9? Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#425
|
||||
|
||||
Quote:
Jay, Aaaakkkk! Spuuuttt... You're right! We still can't do a nose cone in the Subassemblies. But, we might be able to save the created NC as a regular RKT file, and then use that to create the rest of the design. Maybe one day... And if you were the one to download the NCDATA.CSV file from the first post, DON'T INSTALL IT!!!!! See the follow-up post.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#426
|
||||
|
||||
Series 7 RockSim component database
OK, folks, here's the next group. This contains all except three Series 7 nose cones, which are too wild for RockSim to be able to generate from a single entry. As Jay reminded me, we have to hand-craft these cones each time we want to use them. What I'll try to do is work all of these up into RKT files, from which you can pull the parts out and use them in other works.
Remember, rename this file to NCDATA.CSV before running RockSim. You can only add one batch at a time, too.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#427
|
||||
|
||||
Sorry, eh?
Quote:
And Version 9 is my *third* version of RockSim! Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#428
|
|||
|
|||
Quote:
Craig - this sounds like a great idea! I tried to reply earlier from my handheld device, but it wouldn't submit my reply. If each of the participants took a section of parts, we could get through pretty quickly. They could be posted here for review and then added to the master part files. With these parts we could tackle other components such as engine mounts and complex nose cones as sub-assemblies. I'm in to help with the effort. Consistent part files will be a great benefit to the design cause. I have some available web space if needed to post the part files and sub-assemblies some place in addition to the forum. Any selection of parts you interested in us working on first? ... Bill Edit: Just saw the posts regarding inability to make nose cones as sub-assemblies and learned something new. |
#429
|
|||
|
|||
Semroc Series 10 and 11 Cones - Rocksim Parts
Well here is my first contribution to the parts database collaboration efforts. I followed Craig's lead and used 71% for approximate CG location. This file includes all Semroc series 10 and 11 balsa cones except:
BC-1020 Spherical BC-1038 Special BC-1043 Double Cone Please review and let me know how the parts look. If they look ok, I'll continue to develop additional entries. ... Bill Edit: Based on Craig's recommendation, I changed Rounded Ogive shaped cones to Elliptical. Attached parts file has been updated accordingly. Last edited by rkt2k1 : 12-31-2008 at 12:14 AM. |
#430
|
|||
|
|||
I hate to ask a dumb question, but what is the secret to get these files into RS (I have version 8)?
I am running Windows XP Thanks Les OK - spent some more time trying this. If I right click the file, then do a Save As (using the CSV format) it seems to work. Is there an easier way? Last edited by Les : 12-30-2008 at 11:33 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|