Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Golden Age of Model Rocketry > Plans & Publications
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-16-2019, 12:46 PM
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 6,472
Default Thrustline Aerospace F-24 Panther Plans

The link below will take you to the plans for the F-24 Panther kit.

Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well.

http://www.oldrocketplans.com/tla/TLA_F-24_Panther.zip

These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558
Reply With Quote
  #2  
Old 02-19-2019, 12:01 AM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 264
Default

Scott,

Attached below is the data for the Thrustline Aerospace F24 Panther from the RockSim file:

TLA F24 Panther Parts

Nose cone Estes - Estes - PNC-55AC, Material: Polystyrene PS Nose shape: Hollow Ogive, Len: 5.4030 In., Dia: 1.3250 In. Wall thickness: 0.1250 In. Body insert: OD: 1.2000 In., Len: 0.5000 In.

Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3250 In. , ID: 1.2830 In. , Len: 17.0000 In.

Custom Fin set - 2 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
122.845480638039, 0.
105.489495692046, 69.3311937212273
107.417938463822, 136.344580040478
72.2238578788929, 145.986793899362
0., 0.

Custom Fin set - 2 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
64.5050191406548, 0.
65.5206576016314, 16.7700114747567
74.2805393275543, 56.3799114528424
41.9070633839265, 67.1710701007184
0., 0.

Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle 90 degrees
Point List in mm :
221.27572716166, 0.
247.843311604138, 53.4508067986595
223.741368416202, 53.0803183585653
186.996140874188, 21.253743322175
0., 0.

Body tube Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 14.9098 In., Spill hole: 0.0000 In.

Engine hook Estes - Engine hook - Standard size, Material: Mass: 0.0494 Oz.

eyelet - Custom, Material: Mass: 0.0100 Oz.

Mass object - Custom, Material: Mass: 0.3000 Oz.

Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle -45 degrees
Point List in mm :
101.335488226224, 0.
114.749256876695, 31.8222817896545
101.315997545064, 31.8222817896545
0., 0.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 0.5000 In., Loc: 7.3750 In.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 0.5000 In., Loc: 14.2500 In.

Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle -135 degrees
Point List in mm :
101.335489563852, 0.
114.749258391385, 31.8222822097086
101.315998882435, 31.8222822097086
0., 0.
Attached Files
File Type: pdf TLA_F24_Panther2.pdf (1.6 KB, 41 views)
File Type: pdf TLA_F24_Panther3.pdf (1.6 KB, 19 views)
File Type: pdf TLA_F24_Panther4.pdf (2.6 KB, 21 views)
File Type: pdf TLA_F24_Panther5.pdf (1.6 KB, 20 views)
File Type: pdf TLA_F24_Panther6.pdf (1.6 KB, 26 views)
__________________
Bruce S. Levison, NAR #69055

Last edited by teflonrocketry1 : 02-19-2019 at 07:50 PM.
Reply With Quote
  #3  
Old 02-18-2020, 08:20 PM
BARGeezer BARGeezer is offline
Avid Builder
 
Join Date: Nov 2017
Posts: 610
Default

Instructions, parts list, fin templates and marking guides are also on YORP.
__________________
I like the unusual, the off beat, the avant-garde. No 3/4 FNC for me!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 07:35 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024