Since we were snow/ice-bound here in Atlanta, I spent some time updating my website - http://www.jdwindsor.info

Still have a bunch of stuff to post.

Still looking for more photos and info.

__________________
Dale Windsor
NAR 12081, TRA 1795 L3
SoAR 004, TARA 005, MDRA 032

L1 cert: AAA Magnum PA Crude/Vulcan H100 Smokey Sam
L2 cert: LOC/Precision Magnum/Aerotech J350
L3 cert: Smokin' Rockets Nike Smoke/Aerotech M1315

Very nice, Dale.

Steve

Great work! Lots of fun to finally see what some of these looked like.

I haven't seen a MRI engine since the early 1970s.
That was the first engine I ever received and launched.
They were sent (probably illegally) into California from a major mail order company.

__________________
Hans "Chris" Michielssen
Old/New NAR # 19086 SR

www.oddlrockets.com
www.modelrocketbuilding.blogspot.com
http://www.nar.org/educational-reso...ing-techniques/
Your results may vary
"Nose cones roll, be careful with that."
Every spaceman needs a ray gun.
Look out - I'm the Meister Shyster!

I've got an unused blue Estes engine that came in my Firing Line "VAMPIRE" set. Would you like any photos of it?

__________________
BAR after a 29 year absence. Using my plastic, resin & vinyl kit building skills (and my paycheck)
to build what I could only dream of as an 11 year old...

My Rocketreviews.com Gallery

Yes, please.

__________________
Dale Windsor
NAR 12081, TRA 1795 L3
SoAR 004, TARA 005, MDRA 032

L1 cert: AAA Magnum PA Crude/Vulcan H100 Smokey Sam
L2 cert: LOC/Precision Magnum/Aerotech J350
L3 cert: Smokin' Rockets Nike Smoke/Aerotech M1315

I uploaded a couple of dozen photos to a private website for your personal use and PM'd and emailed you. Did you get the messages/photos?

If not I will need to reupload it as I deleted them as promised, and either way there are a bunch more as well.

Jerry

Sorry Jerry, I never saw the message. If you could reupload them I'd really appreciate it. Thanks for your help.

__________________
Dale Windsor
NAR 12081, TRA 1795 L3
SoAR 004, TARA 005, MDRA 032

L1 cert: AAA Magnum PA Crude/Vulcan H100 Smokey Sam
L2 cert: LOC/Precision Magnum/Aerotech J350
L3 cert: Smokin' Rockets Nike Smoke/Aerotech M1315

Added Apogee and Road Runner photos.

__________________
Dale Windsor
NAR 12081, TRA 1795 L3
SoAR 004, TARA 005, MDRA 032

L1 cert: AAA Magnum PA Crude/Vulcan H100 Smokey Sam
L2 cert: LOC/Precision Magnum/Aerotech J350
L3 cert: Smokin' Rockets Nike Smoke/Aerotech M1315

Dale, looking good so far.

Hopefully you can get captions and info up with the pics sometime, I will have to send info for the pics I've submitted ( some posted ) .

Noted one error - the ACS Reaction Labs H160-9 I sent, you have labeld as H160-0, it's labeled in red pen on endcap, circa 1986-87 when I was a dealer.
Also uncertain of the differing listings for ACS-Reaction Labs, vs Reaction Labs... same company, by Mark Weber and Don .
Don later had his Solid Motor Company motors TRA certified, after he and Weber parted ways.

Note on the US Rockets D6-4? .. that was part of a large order purchased at Lucerne dry lake, at Octoberfet 90, will have to scan the pics I have of the US Rockets motor display / hoard. was told that those were leftovere form a special effects shoot, and they are spiral would paper phenolic, ala PML tubing . green case, blue epoxy, and were plugged - as I recall, Jerry asked what delay I wanted, drilled the touch hole and depth by eye with a handheld cordless drill, and added the ejection charge and stamped the endcap on site. Ones I flew all worked fine - that motor in pics now sold, not sure who got that one, maybe you did ?

looking at the Vulcan pics now, good memories, I belive that G44 with black marker line on label was from my collection, iirc, you used to have pics of an H76 that was ex-randy Lieberman, ex Scott Trelease, from my own collection... don't see that one on there now.

I also have a big box of, some rare, som not, fired single use composite motors, including 98mm Aerotech K, pro-jets, Crown, Plasmajets ( including a J300 ), Prodyne K and other goodies , would you want pics of the fired motors ?

Let me know, love the motor history pages, and glad the site is both up and being worked on again ... Jason and myself are working on a history of hpr kits site now, gathering info and looking for a host / maintainer, ( volunteers with web savyness ? ) .

Keep em coming - look forward to what Jerry sends you on the 'private site' , as I am sure he has a slew of early history and motors .

~ AL

Yes, please. Photos and info are welcome.

Made the corrections.

__________________
Dale Windsor
NAR 12081, TRA 1795 L3
SoAR 004, TARA 005, MDRA 032

L1 cert: AAA Magnum PA Crude/Vulcan H100 Smokey Sam
L2 cert: LOC/Precision Magnum/Aerotech J350
L3 cert: Smokin' Rockets Nike Smoke/Aerotech M1315