Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Vendors
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-23-2013, 10:58 AM
AeroTech's Avatar
AeroTech AeroTech is offline
Manufacturer
 
Join Date: Dec 2009
Posts: 142
Default AeroTech Releases Two New DMS™ Motors at NSL Launch in Pueblo, CO

AeroTech Information Release 5/23/2013

AeroTech Releases Two New DMS™ Motors at NSL Launch in Pueblo, CO


AeroTech is introducing two new motors in its DMS™ Disposable Motor System™ line of adjustable delay and ejection single-use motors at the NAR's upcoming NSL launch in Pueblo, CO, the 29mm G80T-14A and H195T-14A.

G80T-14A Motor Data:
Total impulse: 137 N-sec (30.8 lb-sec)
Burn time: 1.7 sec
Peak thrust: 24 lbs (109 N)
Delay time: 14 sec max (adjustable)
Propellant wt.: 62.5 grams (2.2 oz.)
Loaded wt.: 128 grams (4.5 oz.)
Propellant: Blue Thunder™

H195T-14A Motor Data:
Total impulse: 230 N-sec (51.7 lb-sec)
Burn time: 1.16 sec
Peak thrust: 57 lbs (254 N)
Delay time: 14 sec max (adjustable)
Propellant wt.: 107 grams (3.77 oz.)
Loaded wt.: 196 grams (6.91 oz.)
Propellant: Blue Thunder



The G80T and H195T motors are TRA certified and can be purchased and used by flyers attending NSL (customers purchasing the H195T must possess NAR or TRA Level 1 certification at a minimum). They are competitively priced with existing reload kits at $19.99 each retail for the G80T, and $29.99 each for the H195T.

The time delay of DMS motors may be shortened using AeroTech's new Universal Delay Adjustment Tool, which is being provided free of charge to each customer who purchases one or more DMS motors (one free tool to a customer, please).

Motor performance data including a sample time-thrust curve are printed on the motor label.

DMS motors are packaged in a distinctive yellow shipping tube with AeroTech logos printed on the outer spiral wrapping, and the same motor label applied to the outside of the tube for easy identification and performance evaluation by the flyer. Caps on the ends of the tube are applied externally and are easier to remove than internal caps that are stapled to the tube.



The motors feature a glass-reinforced composite phenolic nozzle, a new molded plastic bulkhead and ship with a FirstFire igniter and a molded (G80T) or bonded (H195T) thrust ring.

DMS motors are different from previous and existing reloadable and single-use motors in the following important ways:

• No hardware to buy, load, clean or lose
• High strength, light weight filament-wound fiberglass or molded glass-phenolic casings
• User adjustable time delays in 2 second increments
• User adjustable ejection charge- no more "one size fits all" charges
• High reliability due to less potential for user error while retaining superior customer adjustability
• Low cost

Other DMS motors which will be released soon include the 38mm I140W-14A and J270W-14A, which are in the process of certification testing. These motors are perfect for Level 1 & 2 certifications and general sport flying and will also be priced competitively with similar reloads.

The DMS motor design and the Universal Delay Adjustment Tool are patent pending.

AeroTech`s DMS line ushers in a new era of ease of use, low cost and spectacular performance to the modern hobby rocketry market.

"DMS- When you just want to fly!™"
__________________
For warranty questions & issues please contact Karl at warranty@aerotech-rocketry.com
For customer service questions & issues please contact Jenn at customerservice@aerotech-rocketry.com

AeroTech Consumer Aerospace
Division of RCS Rocket Motor Components, Inc.
2113 W 850 N
Cedar City, UT 84721
435-865-7100 (Ph)
435-865-7120 (Fax)
http://www.aerotech-quest.com
http://www.rocketmotorparts.com.com
http://www.specificimpulse.com
Reply With Quote
  #2  
Old 05-23-2013, 03:03 PM
BEC's Avatar
BEC BEC is offline
Master Modeler
 
Join Date: Feb 2009
Location: Auburn, Washington
Posts: 3,643
Default

Interesting. I have my Leviathan with me so I could try a G80.

It will be interesting as I generally fly 2- and 3-grain CTI motors in it and have some with me as well.
__________________
Bernard Cawley
NAR 89040 L1 - Life Member
SAM 0061
AMA 42160
KG7AIE
Reply With Quote
  #3  
Old 05-23-2013, 03:08 PM
chadrog's Avatar
chadrog chadrog is offline
Out to launch...
 
Join Date: Feb 2011
Location: South Milwaukee WI
Posts: 1,488
Default

Is this another name change? Or an addition to the FU line ?
__________________
www.wooshrocketry.org NAR Sec. 558
Look us up on YouTube: http://www.youtube.com/user/guytogo75?feature=mhee
unstable by design
Reply With Quote
  #4  
Old 05-23-2013, 09:32 PM
BEC's Avatar
BEC BEC is offline
Master Modeler
 
Join Date: Feb 2009
Location: Auburn, Washington
Posts: 3,643
Default

Looks like a name change to me......
__________________
Bernard Cawley
NAR 89040 L1 - Life Member
SAM 0061
AMA 42160
KG7AIE
Reply With Quote
  #5  
Old 05-23-2013, 10:32 PM
Initiator001 Initiator001 is offline
Too Many Initiators is Never Enough
 
Join Date: Mar 2005
Location: San Diego, CA
Posts: 2,394
Default

I will have my AeroTech Sumo kit available for demo flying.

A G80-7 works well in that model.

One of those H135 motors sounds good, too.
__________________
Bob
S.A.M. # 0014
Reply With Quote
  #6  
Old 05-23-2013, 11:28 PM
BEC's Avatar
BEC BEC is offline
Master Modeler
 
Join Date: Feb 2009
Location: Auburn, Washington
Posts: 3,643
Default

Gary, will you be selling these or will perhaps Apogee?
__________________
Bernard Cawley
NAR 89040 L1 - Life Member
SAM 0061
AMA 42160
KG7AIE
Reply With Quote
  #7  
Old 05-23-2013, 11:53 PM
chadrog's Avatar
chadrog chadrog is offline
Out to launch...
 
Join Date: Feb 2011
Location: South Milwaukee WI
Posts: 1,488
Default

Quote:
Originally Posted by BEC
Looks like a name change to me......

Cool, instant collector item! Wish I had one of the original labels. Well I think I do, but it's under the version 2 label.
__________________
www.wooshrocketry.org NAR Sec. 558
Look us up on YouTube: http://www.youtube.com/user/guytogo75?feature=mhee
unstable by design
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 08:06 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024