#1
|
|||
|
|||
Seeking Semroc Bandit
Looking for a Semroc Bandit if anyone has a extra they are willing to unload. Mine CATO'ed and only the nose cone survived.
__________________
Build floor: Estes Pro Series Jayhawk, Estes LTV Scout In paint: Estes Interceptor II Ready for 1st flight: Custom Rockets Bullet, Semroc/Centuri Renegade, Semroc Laser X, Estes Beta Launch Vehicle, MPC Flare Patriot, Estes Nimbus, Estes SR-71, Estes Nebulon Warrior, Semroc Ruskie, Estes Nike -X, Estes Mini-Shuttle Clone. Estes Renegade, Estes Big Red Max, Estes Phoenix, Fliskits Shadowlord, Custom Rockets SAM-X, thanks Texas Winds and rain. Austin TX |
#2
|
||||
|
||||
My spreadsheet says I have two of them — one is production number 0013 and one is unnumbered. I also have a flyable example. I'm not sure about "unload" but we could discuss.
I will be away for a week beginning very early Sunday morning helping at the WSMC.
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#3
|
||||
|
||||
All of the individual parts, including the pre-drilled tubes, are available on the eRockets website. I know because I ordered them a few weeks ago.
__________________
NAR 79743 NARTrek Silver I miss being SAM 062 Awaiting First Launch: Too numerous to count Finishing: Zooch Saturn V; Alway/Nau BioArcas; Estes Expedition; TLP Standard Repair/Rescue: Cherokee-D (2); Centuri Nike-Smoke; MX-774 On the Bench: 2650; Dream Stage: 1/39.37 R-7 |
#4
|
|||
|
|||
Thanks Mark, when I looked I only saw the fins and decals. I will look by part number. Thank you.
__________________
Build floor: Estes Pro Series Jayhawk, Estes LTV Scout In paint: Estes Interceptor II Ready for 1st flight: Custom Rockets Bullet, Semroc/Centuri Renegade, Semroc Laser X, Estes Beta Launch Vehicle, MPC Flare Patriot, Estes Nimbus, Estes SR-71, Estes Nebulon Warrior, Semroc Ruskie, Estes Nike -X, Estes Mini-Shuttle Clone. Estes Renegade, Estes Big Red Max, Estes Phoenix, Fliskits Shadowlord, Custom Rockets SAM-X, thanks Texas Winds and rain. Austin TX |
#5
|
||||
|
||||
Quote:
Other than body tubes, centering rings, and an engine hook, that's all you need, since you have the nose cone. |
Thread Tools | Search this Thread |
Display Modes | |
|
|