#1
|
||||
|
||||
*Centuri* Phoenix Bird
Hello All,
Last night I was looking up documentation on the Centuri Phoenix Bird (*not* the Estes re-issue) and its higher-powered sister, the Enerjet 1340 Sounding Rocket. The Estes Eliminator kit contains all of the Phoenix Bird's airframe parts except one--the plastic tubing connector, which was a molded plastic component. It was a cylinder with blunt conical front and rear ends (which fit inside the body tube and the payload section tube; the rear cone had [I think] a molded-on loop, not necessarily circular, to which the parachute and the shock cord were tied, and: When the rocket was fitted together for flight (or display), the only portion of the plastic tubing coupler that was visible was a short section in its middle, which was the same diameter as the 1.34" O.D. body and payload tubes (Centuri #13 and Estes BT-56 designations). Does anyone have the dimensions of this #13 tubing coupler (particularly the length of the exposed "ring section" that matches the body tube diameter)? Re-creating this part would enable the Estes Eliminator to be converted to a Centuri Phoenix Bird or Enerjet 1340 Sounding Rocket clone. Many thanks to anyone who can help!
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
Thread Tools | Search this Thread |
Display Modes | |
|
|