Yep, the Orion *is* the body (booster) section of the Green Hornet with a 2.75" nose cone instead of the Green Hornet's wider payload section--the Green Hornet's booster body tube is also 21.1 cm (~8-3/8") long, just like the Orion's body tube (see: http://www.oldrocketplans.com/canar...reen_Hornet.pdf ). Who knows, Taras might even have some 3 mm balsa fin stock for their fins!

__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see:
http://www.lulu.com/content/paperba...an-form/8075185
http://www.lulu.com/product/cd/what...of-2%29/6122050
http://www.lulu.com/product/cd/what...of-2%29/6126511
All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com.
NAR #54895 SR

Taking a quick look at http://www.oldrocketplans.com/canar...reen_Hornet.pdf, in fact we can confirm that the airframes for the two models are the same. As are the fin patterns.

Both models are gems.

__________________
John
YORF #003
SAM #004

Unfortunately when I opened them in Corel the entire decal is 1" square. Basically Micro Maxx size.

That's just not right.

Does anyone have the dimensions of the roll pattern?

That would help.

I have a good image to draw the decals but I need the correct size, please.

__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/

Gordon;

I squeezed the file to post it on YORF; if you like, I can send the full size to you directly.

__________________
John
YORF #003
SAM #004

I managed to get it larger but it's way too large. Good resolution so all I need is the size (in inches) of the roll pattern and I can scale it.

Oh, wait...I have to help my wife put the bird in the oven.

__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/

You've got my email......

__________________
Don
NAR 53455
"Carpe Diem"

Nope i didn't. What email did you send it to?

__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run"

http://sandmandecals.com/

Sorry for the confusion Gordon......

I was replying to John's post to you.......

__________________
Don
NAR 53455
"Carpe Diem"

If it will help to derive the roll pattern width (although John Brohm's and/or Don's measurements of the actual decal would be definitive), the Orion used 0.752" outside diameter tubing (the roll pattern decal would probably have imperceptibly more overlap on an Orion clone made using the 0.736" diameter BT-20 tubing).

__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see:
http://www.lulu.com/content/paperba...an-form/8075185
http://www.lulu.com/product/cd/what...of-2%29/6122050
http://www.lulu.com/product/cd/what...of-2%29/6126511
All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com.
NAR #54895 SR

Happy Thanksgiving, everyone;

The roll pattern is precisely 89 mm long in the longitudinal axis; each red bar is precisely 5 mm wide.

__________________
John
YORF #003
SAM #004