Ye Olde Rocket Forum - A Question About the Estes Scion.

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)

- Current Kit Talk (http://www.oldrocketforum.com/forumdisplay.php?f=9)

- - A Question About the Estes Scion. (http://www.oldrocketforum.com/showthread.php?t=16350)

rtuinila

11-26-2016 08:32 AM

A Question About the Estes Scion.

Hi Folks!

How important is it to install the "Spacer Ring C" next to the forward centering ring?

stefanj

11-26-2016 08:53 AM

1 Attachment(s)

Probably adds a bit of support, and ensures alignment so the fin tabs fit in between the rings, but not super-neccessary. As long as your properly fillet the rings you should be fine.

The rear spacer ring is required to properly fit the motor retainer. Didn't realize that when I built an earlier PSII kit.

FWIW, I used the suggested paint job on my Scion and it came out looking pretty spiffy.

Vanel

11-26-2016 10:34 AM

Quote:

Originally Posted by stefanj

FWIW, I used the suggested paint job on my Scion and it came out looking pretty spiffy.

That it does!!

All times are GMT -5. The time now is 08:39 AM.