Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   3D Printing Asylum (http://www.oldrocketforum.com/forumdisplay.php?f=62)
-   -   BT-55 to 24mm Boat Tail 3D Model (http://www.oldrocketforum.com/showthread.php?t=18214)

Jack Hydrazine 12-07-2019 04:54 PM

BT-55 to 24mm Boat Tail 3D Model
 
I designed a BT-55 to 24mm boat tail. You can download it from Thingiverse for free and print it. There are two versions - one that allows for an engine hook and one that doesn't.

https://www.thingiverse.com/thing:4029435

the mole 12-07-2019 06:51 PM

Is there a chance of a BT-60 to a BT-55 boattail possible in the future? It would be nice to have this for an X-15 model.

Jack Hydrazine 12-08-2019 08:19 AM

Sure. They are pretty easy to design. How long does it need to be? Does it need a channel for an engine hook?

the mole 12-08-2019 08:30 AM

Quote:
Originally Posted by Jack Hydrazine
Sure. They are pretty easy to design. How long does it need to be? Does it need a channel for an engine hook?


This would be great. The length 1" inch and engine Chanel not needed. Thanks in advance.

Jack Hydrazine 12-08-2019 11:00 AM

Here ya go! I ended making to versions - one with and one without an engine hook channel.

https://www.thingiverse.com/thing:4031312

the mole 12-08-2019 12:42 PM

Quote:
Originally Posted by Jack Hydrazine
Here ya go! I ended making to versions - one with and one without an engine hook channel.

https://www.thingiverse.com/thing:4031312


Thanks, Jack, I wish I had the ability to draw this kind of thing. Thanks again. I'll be printing up a few this week.

Jack Hydrazine 12-08-2019 12:56 PM

Let me know if I need to make any changes to it.

the mole 12-09-2019 09:54 AM

2 Attachment(s)
Jack, just a couple pictures to let you know the BT-60 to BT-55 boattail turned out great and fits good also. Thanks again.

Jack Hydrazine 12-09-2019 09:20 PM

That looks really good! I'm glad to see the dims I used worked correctly.

What kind of printer did you use and what kind of plastic did you use to print with?

the mole 12-09-2019 09:52 PM

Quote:
Originally Posted by Jack Hydrazine
That looks really good! I'm glad to see the dims I used worked correctly.

What kind of printer did you use and what kind of plastic did you use to print with?


I have a Creality CR-10mini. The plastic was PLA. I have only been printing for about 2 months.
I use Ultimaker Cura to turn STL into a slier code. Thanks again, Jack.


All times are GMT -5. The time now is 08:06 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.