Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Vendors (http://www.oldrocketforum.com/forumdisplay.php?f=7)
-   -   ABS 3D Printed Parts (http://www.oldrocketforum.com/showthread.php?t=17832)

UMRS 03-23-2019 11:35 AM

ABS 3D Printed Parts
 
1 Attachment(s)
WE will slowly be releasing 3D printed parts made from ABS ink. We are currently testing several now. The Tube couplers will be the first to be released.

They wont be on the website officially for at least a week. But you can get them here.

BT60's are whats being run now. They are 2" in height. $1.00 each plus $6.00 regardless of quantity. All that's needed is some minor sanding on one end. Possibly around the coupler but so far they have fit good with little or no sanding. Use epoxy or CA to bond.

email all inquires at sales@unclemikesrocketshack.com


All times are GMT -5. The time now is 09:15 PM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.