Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Plans & Publications (http://www.oldrocketforum.com/forumdisplay.php?f=4)
-   -   Thrustline Aerospace Mike IX Plans (http://www.oldrocketforum.com/showthread.php?t=17766)

Ltvscout 02-16-2019 12:57 PM

Thrustline Aerospace Mike IX Plans
 
The link below will take you to the plans for the Mike IX kit.

Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well.

There are multiple RockSim files in this plan set. Since I don't have RockSim or OpenRocket I'm not sure what the differences are.

http://www.oldrocketplans.com/tla/TLA_Mike_IX.zip

These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.

teflonrocketry1 02-19-2019 09:25 PM

4 Attachment(s)
Scott,

Attached below is the data for the Thrustline Aerospace Mike IX from the RockSim file mike9emrr:

TLA Mike IX Parts

Nose cone Custom Thrustline BT80 Nose Cone, Material: Balsa Nose shape: Solid Parabolic, Len: 7.6875 In., Dia: 2.6000 In. Body insert: OD: 2.5680 In., Len: 1.5000 In. CG: 6.3297 In. , Mass: 2.2868 Oz.

Eye Hook - Custom, Material: Mass: 0.4000 Oz.

Body tube Thrustline BT-80 Body Tube, Material: Paper OD: 2.6000 In. , ID: 2.5880 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 0.5391 Oz.

30" Parachute Thrustline 30" Round Parachute, Material: Rip stop nylon 1 parachute, Shape: Round Dia: 30.0000 In., Spill hole: 0.0000 In. CG: 0.0000 In. , Mass: 1.0000 Oz.

Shock cord - Custom, Material: 5/64 In. round elastic CG: 0.0000 In. , Mass: 0.1594 Oz

Body tube Thrustline BT-80 Body Tube, Material: Paper OD: 2.6000 In. , ID: 2.5880 In. , Len: 17.0000 In. CG: 8.5000 In. , Mass: 0.5391 Oz.

Tube coupler LOC Precision - TC-2.56 - Tube Coupler, Material: paper Tube couplerOD: 2.5880 In., Hole #1: : 60.7314 In. Len: 3.0000 In. Location: - 1.5000 In. From the front of Body tube

Bulkhead - Custom, Material: Basswood BulkheadOD: 2.5880 In., Hole #1: : 23.6220 In. Len: 0.1250 In. Location: 1.5000 In. From the front of Body tube

Fwd Fin set - Custom, 4 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
95.25000062865, 0.
95.25000062865, 12.70000008382
25.40000016764, 12.70000008382
0., 0.

Mid Fin set - Custom, 4 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
133.35000088011, 0.
133.35000088011, 80.9625005343525
114.30000075438, 80.9625005343525
0., 0.

Fwd MMT Centering Ring Apogee - 13031 - CR 18-24, Material: Paper Centering ringOD: 2.5880 In., Hole #1: : 0.9760 In. Hole #2: : 0.9760 In. Hole #3: : 0.9760 In. Len: 0.1875 In. Location: 4.0000 In. From the base of Body tube

Aft MMT Centering Ring Apogee - 13031 - CR 18-24, Material: Paper Centering ringOD: 2.5880 In., Hole #1: : 0.9760 In. Hole #2: : 0.9760 In. Hole #3: : 0.9760 In. Len: 0.1875 In. Location: 0.1250 In. From the base of Body tube

24mm MMT 1 Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 6.0000 In. Location: 0.0000 In. From the base of Body tube

24mm MMT 2 Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 6.0000 In. Location: 0.0000 In. From the base of Body tube

24mm MMT 3 Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 6.0000 In. Location: 0.0000 In. From the base of Body tube

Aft Fin set - Custom, 4 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
114.30000075438, 0.
114.30000075438, 101.60000067056
63.5000004191, 101.60000067056
0., 0.


All times are GMT -5. The time now is 05:19 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.