Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Plans & Publications (http://www.oldrocketforum.com/forumdisplay.php?f=4)
-   -   Thrustline Aerospace Hank Plans (http://www.oldrocketforum.com/showthread.php?t=17759)

Ltvscout 02-14-2019 03:11 PM

Thrustline Aerospace Hank Plans
 
The link below will take you to the plans for the Hank kit.

Each plan set also includes a RockSim file for the kit. That's a good thing since nowhere could I find a parts list of tubing type, length, etc. I'd appreciate it if someone with RockSim or OpenRocket will give me a hand by adding a reply to this post listing the parts type/size you extract from the RockSim file. If you could include the templates from the RockSim file I'd appreciate that as well.

http://www.oldrocketplans.com/tla/TLA_Hank.zip

These Thrustline Aerospace plans are for PERSONAL USE ONLY! John Rowan-Stern and Thrustline Aerospace reserves all commercial use rights.

teflonrocketry1 02-18-2019 10:15 PM

2 Attachment(s)
Scott,

Attached below is the data for the Thrustline Aerospace Hank from the RockSim file:

TLA Hank Parts

Nose cone Estes - Estes - PNC-60MS, Material: Polystyrene PS Nose shape: Hollow Elliptical, Len: 2.5000 In., Dia: 1.6370 In. Wall thickness: 0.1250 In. Body insert: OD: 1.5120 In., Len: 0.7500 In.

Mass object - Custom, Material: Mass: 0.5600 Oz.

Body tube Estes - EST 3089 - BT-60, Material: Paper OD: 1.6370 In., ID: 1.5950 In., Len: 10.7500 In.

Custom Fin set - 3 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
69.8129684322958, 0.
57.1081327612553, 44.5601469133141
25.2676186721044, 50.9909896603839
0., 0.

Custom Fin set - 3 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
70.1266680784944, 0.
51.1478394834832, 18.8367759250345
25.5813183183029, 22.2874720332183
0.,0.

Body tube 1 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In., ID: 0.7100 In., Len: 2.7500 In. Location: 8.0000 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 1

Ring - Custom, Material: Basswood Centering ringOD: 0.7100 In., Len: 0.1250 In. Location: 0.1250 In. From the front of Body tube 1

Engine hook Estes - Engine hook - Standard size, Material: Mass: 0.0494 Oz.

Body tube 2 Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In., ID: 0.7100 In., Len: 2.7500 In. Location: 8.0000 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube 2

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 12.5070 In., Spill hole: 0.0000 In. CG: 1.0423 In. , Mass: 0.0769 Oz.

matthew 02-20-2019 03:13 PM

My Hank came with a balsa NC.

teflonrocketry1 02-20-2019 04:23 PM

Matthew,

The information I posted is directly from the one RockSim file in the zip file that Scott posted a link to.

The RockSim file for the Hank at Rocketreviews.com ; https://www.rocketreviews.com/unknown-hank.html

uses a solid balsa nosecone as you indicated ;
https://www.rocketreviews.com/custo...-cone-5483.html

Manufacturer: Custom
Part Number:
Style: Elliptical
Diameter: 1.6370 in
Length: 2.6043 in
Shoulder Diameter: 1.5750 in
Shoulder Length: 0.7709 in

matthew 02-21-2019 03:08 PM

Yes, it's odd that John (or whoever supplied the sim to John) simmed it with the PNC. *shrug* All good. :)


All times are GMT -5. The time now is 03:50 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.