07-26-2019, 08:02 PM
|
|
Semi-Pro Rocketeer TRA 10484 L2
|
|
Join Date: Apr 2007
Posts: 428
|
|
Actually, I would rather build one from scratch with a 3d printed fin can and apogee nose cone set using the tubes from e-rockets. I wouldn't put all the internal plumbing inside it like the old Estes K-29 kit had. Would have it more on the line of Kosrox and Apogee 1/70th Saturns. I would get some vacuum molded wraps that are still around along with the Moles stick on printed Wraps
By the way, I use a BT60 Core tube with one extra layer of a split BT60 around the core about a couple of inches wide underneath the top and bottom of the 8 fuel tanks to get the right diameter, and then put a 24mm mount inside it for D-E power or you could use a three 18mm cluster.
I could build three, maybe even 4 of these at the price of $355.00 most likely. 3 for sure!
|