08-15-2018, 12:59 AM
|
Junior Rocketeer
|
|
Join Date: Aug 2010
Posts: 24
|
|
while the mechanicals might on paper be capable of 0.01 I don't think the machine itself can actually achieve that.
it is a VERY nice printer and fully enclosed.
I do not think its worth 10 times the price. the ender 3 can achieve 0.05mm with tuning. I have already done it as have others. it takes GOOD low viscosity pure filament and slow print speeds.
not worth it. a well tuned printer can do 0.2mm and the layers pretty much vanish unless yous tick your eyeball up to it (depending on the shape you print etc..)
I print my nosecones at 0.4mm layer height with a 1.2mm nozzle. sometimes 0.6mm layer height and they look just fine!
if you want to print tiny details you get a resin printer ($500 nowadays) otherwise you probably do not need such resolutions in practical day to day use.
you can buy 20 ender 3's for the price of one of those.
|